Digitald Card Pixelating Problems.

R

Romytoy

Member
Joined
Oct 2, 2008
Messages
3
Reaction score
0
Points
0
Age
71
My Satellite Setup
Using a Satcatcher Voyager with a 1.2 metre Dish and a 0.1db lnb.
My Location
Inverness North of Scotland
Using a 1.2 metre dish and a 0.1db Lnb on Eutelsat 16 east. Signal level is 60% and Quality is 80% all the scramled channels are permently pixelating. Card was activated on suppliers system down south. Any suggestions? :confused North east Scotland site.
 
rolfw

rolfw

Believe it when I see it Admin.
Staff member
Joined
May 1, 1999
Messages
38,296
Reaction score
1,620
Points
113
My Satellite Setup
Technomate 5402 HD M2 Ci, DM7000s, Transparent 80cm Dish, Moteck SG2100 DiseqC motor, lots of legacy gear. Meters: Satlook Digital NIT, Promax HD Ranger+ spectrum analyser.
My Location
Berkshire
Could be an alignment issue, possibly the LNB skew needs adjusting, would have thought that a 1.2m dish would give better figures than that if aligned correctly.
 
R

Romytoy

Member
Joined
Oct 2, 2008
Messages
3
Reaction score
0
Points
0
Age
71
My Satellite Setup
Using a Satcatcher Voyager with a 1.2 metre Dish and a 0.1db lnb.
My Location
Inverness North of Scotland
Have aligned new dish with Meter old 1.1 metre dish was the same. Will check again for building in line of site but looks clear.
Thanks
 
R

Romytoy

Member
Joined
Oct 2, 2008
Messages
3
Reaction score
0
Points
0
Age
71
My Satellite Setup
Using a Satcatcher Voyager with a 1.2 metre Dish and a 0.1db lnb.
My Location
Inverness North of Scotland
Have re-aligned dish. Signal now at 90% and quality 95%. Card still not reading scrambled channels. Going to send card back for rechecking and replacing!)(-red
 
Top