Egis in polarmount and multifeed system for ku and c band

P

pitussat

Member
Messages
25
My Satellite Setup
dishes: CM 3m SMC,-Prodelin 3m SMC old version ,Prodelin 1183 1,80m SMC, Fibo 1,2m,
receivers;>30 different tyupes.+ TBS5925/6925 ETC
Instruments: HP 8563e, tek 491bp , Rover MC16HD, Promax premium3,Unaohm 507a etc etc
My Location
belluno,, Italy
sorry ,not about thread........RIMAS...i'm searching for a feed-horn in Cassegrain CONFIGURATION, making experiments on my PRODELIN 1305(3m PFa, 0,3f/d), have you?

What frequencies are you trying to receive on the Prodelin ?
10,7-12,7 GHz
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Messages
29,969
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
Your estimated sub reflector diameter ?
 
RimaNTSS

RimaNTSS

Super Moderator
Staff member
Messages
5,003
My Satellite Setup
Some SAT-related hardware.
My Location
N-E from Riga
a second-hand Egis is better than a new one ?
I do not think so, but price for second hand one can be much less than for a new one. Besides, I do not know whether new motors are for sale and how much they cost.
 
M

mirko73

Member
Messages
26
My Satellite Setup
GIBERTINI 150 -SMR 1224
My Location
ITALY
I do not think so, but price for second hand one can be much less than for a new one. Besides, I do not know whether new motors are for sale and how much they cost.
my doubt about second hand Egis is having trouble after mounting and no warranty on it!
anyway I will have a look on special offers on it
 
M

mirko73

Member
Messages
26
My Satellite Setup
GIBERTINI 150 -SMR 1224
My Location
ITALY
Hi all,
no chance to choose a second-hand robot because some offers are with no controller or components (screws,...).
So I'm thinking about new full equipped Egis .
Does anyone know if on a bi-axial motor each single Lnb's KU and C must be equipped with a polarizer?
 
Last edited:
H

Hugocz

New Member
Messages
4
My Satellite Setup
VU+ ultimo 4k
My Location
CZECH REPUBLIC
Hi all,
no chance to choose a second-hand robot because some offers are with no controller or components (screws,...).
So I'm thinking about new full equipped Egis .
Does anyone know if on a bi-axial motor each single Lnb's KU and C must be equipped with a polarizer?
Hi guys.
I managed to buy a complete old EGIS ROBOT in good condition. But I am not satisfied with the possibilities of the original control unit. That's why I started developing my own solution. I have a new HW ready and I am trying to write a control SW. It will probably take me some time. If you are interested in my work, I have a detailed description here: www.jevicko.org/egis
 
Trust

Trust

Specialist Contributor
Messages
932
My Satellite Setup
1.8 m CM at SMR 1224 + Elev. with 7 lnb changer Ku (lin - circ) - Ka (lin - circ) C (lin - circ)
My Location
Nijmegen Netherlands
Hi all,
no chance to choose a second-hand robot because some offers are with no controller or components (screws,...).
So I'm thinking about new full equipped Egis .
Does anyone know if on a bi-axial motor each single Lnb's KU and C must be equipped with a polarizer?
If you use a Polarotor with a C and Ku lnb , there is a skewmotor that works for both lnb's .
Long time ago with a universal Ku lnb on my 1.5 m PF dish , I skewed the complete dish .

april2006 029.jpg
 
Trust

Trust

Specialist Contributor
Messages
932
My Satellite Setup
1.8 m CM at SMR 1224 + Elev. with 7 lnb changer Ku (lin - circ) - Ka (lin - circ) C (lin - circ)
My Location
Nijmegen Netherlands
Hi guys.
I managed to buy a complete old EGIS ROBOT in good condition. But I am not satisfied with the possibilities of the original control unit. That's why I started developing my own solution. I have a new HW ready and I am trying to write a control SW. It will probably take me some time. If you are interested in my work, I have a detailed description here: www.jevicko.org/egis
@Hogocz , maybe its better to start your own topic instead of continuing here . (or a mod will move it )
I do have some experience with this equipment but I'm not intending to make a new controller but can help you out with the original schematics .
 
H

Hugocz

New Member
Messages
4
My Satellite Setup
VU+ ultimo 4k
My Location
CZECH REPUBLIC
It may be better to start your own topic. So far, I wanted to find out if anyone would be interested in rebuilding EGIS ROBOT. Looks like yes. :-)
 
Top