bloater
Member
- Joined
- Jul 11, 2008
- Messages
- 8
- Reaction score
- 0
- Points
- 0
- Age
- 80
- My Satellite Setup
- Fibo 90/Technomate 5500DAPCI
- My Location
- Kent
I am setting up a Fibo dish but cannot establish the correct declination angle, to set on the back of the dish.
Fibo data states the theoretical offset angle is 24.6deg. but lower in the spec sheet the figure is 15deg.
Can anyone please advise.
My latitude is 51.41, longitude 0.79, which gives an elevation of 30deg, to be added to the the dish offset.
At present I am getting a 'no signal' message on my Technomate 5500 DAPCI receiver, which I believe may be due to an incorrectly set declination angle.
Any help would be greatly appreciated.
Regards,
Bloater
Fibo data states the theoretical offset angle is 24.6deg. but lower in the spec sheet the figure is 15deg.
Can anyone please advise.
My latitude is 51.41, longitude 0.79, which gives an elevation of 30deg, to be added to the the dish offset.
At present I am getting a 'no signal' message on my Technomate 5500 DAPCI receiver, which I believe may be due to an incorrectly set declination angle.
Any help would be greatly appreciated.
Regards,
Bloater