T24
Info Exec
- Joined
- Oct 9, 2002
- Messages
- 566
- Reaction score
- 5
- Points
- 18
How to use Elvis:
Click on power button.
Choose the com port that your Elvis is connected to
To program a Funcards
Click the Funcard tab
In the window with the scroll bar top left click on one of the empty spaces and give your
project a name.
Click in the card window "top right" and choose the type of Fun card
(24C64,24C128,24C256...) you want to program
If you are programming a 6in1 tick the Flash and EXT ee,now click the load button
underneath the Flash check box and load you Flash.hex then click the load button
underneath the EXT ee check box and load your EEprom.hex, click the program button your
card will now be programmed.
If you are programming a hex that requires the Internal EEprom to be programmed like
"Funvia" tick the INT EE box and click the load button underneath and load your internal
EEprom before you press the program button
To program a Piccards
Click the Piccard tab
In the window with the scroll bar top left click on one of the empty spaces and give your
project a name
Click in the card window "top right" and choose the type of card you want to program (Gold,
Silver,Green or Blue)
Click the load button under Where it says Pic,and load your pic.hex
Tick the EXT EE check box, click the load button directly below and load your EEprom.hex
Press the Program button to program your card
Click on power button.
Choose the com port that your Elvis is connected to
To program a Funcards
Click the Funcard tab
In the window with the scroll bar top left click on one of the empty spaces and give your
project a name.
Click in the card window "top right" and choose the type of Fun card
(24C64,24C128,24C256...) you want to program
If you are programming a 6in1 tick the Flash and EXT ee,now click the load button
underneath the Flash check box and load you Flash.hex then click the load button
underneath the EXT ee check box and load your EEprom.hex, click the program button your
card will now be programmed.
If you are programming a hex that requires the Internal EEprom to be programmed like
"Funvia" tick the INT EE box and click the load button underneath and load your internal
EEprom before you press the program button
To program a Piccards
Click the Piccard tab
In the window with the scroll bar top left click on one of the empty spaces and give your
project a name
Click in the card window "top right" and choose the type of card you want to program (Gold,
Silver,Green or Blue)
Click the load button under Where it says Pic,and load your pic.hex
Tick the EXT EE check box, click the load button directly below and load your EEprom.hex
Press the Program button to program your card