Jaeger smr 1224 adjustment-overhaul-maintenance

cardiff

Regular Member
Joined
Mar 1, 2006
Messages
79
Reaction score
69
Points
18
Age
60
Location
Brittany
My Satellite Setup
Laminas As 1800, multifocus 14 LNB
My Location
France
Hello everybody,

Back on an old thread on the restoration of a SMR 1224 (restoration / modification Jaeger 1224 - SatsUK)
Jaeger 1224 restoration/modification - SatsUK

make by RimaNTSS but he does not remember exactly the details of the modifications made 6 years ago.

he said:
"all the gears have been removed to tighten them" how to tighten them ?

the 2 parts with the gears with 4 screws added to tighten the gears
6 (Large).JPG+ 6 (Large) a.JPG

There are also the 2 red Allen screws what are they used for?
allen screw.jpg
I also have the magnetic wheel that I tightened several times, I think there is a little "play" with this magnetic wheel, there is a very slight shift in the number of pulses, it would come from all gears?magnetic wheel.jpg

do I have to dismantle everything to check! (to see pictures) ?"
5 (Large).JPG
Thanks to everyone who can give me answers

Cardiff
 

Attachments

  • 6 (Large) a.JPG
    6 (Large) a.JPG
    429.4 KB · Views: 93

Trust

Specialist Contributor
Joined
Jul 18, 2004
Messages
1,127
Reaction score
1,617
Points
113
Age
77
My Satellite Setup
1.8 m CM at SMR 1224 + Elev. with 7 lnb changer Ku (lin - circ) - Ka (lin - circ) C (lin - circ)
My Location
Nijmegen Netherlands
Hello everybody,

Back on an old thread on the restoration of a SMR 1224 (restoration / modification Jaeger 1224 - SatsUK)
Jaeger 1224 restoration/modification - SatsUK

make by RimaNTSS but he does not remember exactly the details of the modifications made 6 years ago.

he said:
"all the gears have been removed to tighten them" how to tighten them ?

the 2 parts with the gears with 4 screws added to tighten the gears Its all about those 4 screws I think , just check they are tight
View attachment 131200+ 6 (Large) a.JPG

There are also the 2 red Allen screws what are they used for? Behind those red screws are springs , they put tension on the worm axel to the worm wheel
Dont put to much tension on that wom axel , it can break
They should stick out 1 mm or are even with that block

View attachment 131203
I also have the magnetic wheel that I tightened several times, I think there is a little "play" with this magnetic wheel, there is a very slight shift in the number of pulses, it would come from all gears?View attachment 131204
I dont think the miscounts is done by the gears , maybe the distance between the reedswitch and the swinging magnetic wheel .

do I have to dismantle everything to check! (to see pictures) ?" If those 4 scews are loose and you can move that motor gear part a little apart from that big main gear , both plastic covers need to be removed
View attachment 131205
Thanks to everyone who can give me answers

Cardiff

Click to expand to see my comments
Is this the motor from Rimants ?
 

cardiff

Regular Member
Joined
Mar 1, 2006
Messages
79
Reaction score
69
Points
18
Age
60
Location
Brittany
My Satellite Setup
Laminas As 1800, multifocus 14 LNB
My Location
France
Thank's for all your precise and complete answers

Yes, this is the SMR 1224 from Rimants , I told him about it because I used the pictures from his thread Apr 6, 2014

Thank you

Cardiff
 

cardiff

Regular Member
Joined
Mar 1, 2006
Messages
79
Reaction score
69
Points
18
Age
60
Location
Brittany
My Satellite Setup
Laminas As 1800, multifocus 14 LNB
My Location
France
Hello,

I'm looking for where exactly are the metal slats positioned around the mechanism of the Jaeger SMR 1224?

I found 9 metal slats by dismantling the SMR 1224.

(I disassembled it a few months ago and I'm reassembling now)

3 are known as shown in the photos.
SMR 1224 a.JPG
others ?
SMR 1224 b.JPG
Thank you to all who can answer me.

Cardiff
 
Last edited:

Trust

Specialist Contributor
Joined
Jul 18, 2004
Messages
1,127
Reaction score
1,617
Points
113
Age
77
My Satellite Setup
1.8 m CM at SMR 1224 + Elev. with 7 lnb changer Ku (lin - circ) - Ka (lin - circ) C (lin - circ)
My Location
Nijmegen Netherlands
Stick 3 slats together on the 3 rims if I remember well
 

cardiff

Regular Member
Joined
Mar 1, 2006
Messages
79
Reaction score
69
Points
18
Age
60
Location
Brittany
My Satellite Setup
Laminas As 1800, multifocus 14 LNB
My Location
France
Stick 3 slats together on the 3 rims if I remember well
Thank you Trust

I believe there are in these places but I am not sure.
SMR 3.JPG
on this 2nd picture we can see, but i'm not sure !
SMr 1224 d.JPG

Cardiff
 
Last edited:

Trust

Specialist Contributor
Joined
Jul 18, 2004
Messages
1,127
Reaction score
1,617
Points
113
Age
77
My Satellite Setup
1.8 m CM at SMR 1224 + Elev. with 7 lnb changer Ku (lin - circ) - Ka (lin - circ) C (lin - circ)
My Location
Nijmegen Netherlands
The other picture of the bottom plate with the 3 red arrows shows the right place
 

anto@

Regular Member
Joined
Oct 30, 2015
Messages
289
Reaction score
295
Points
63
Age
59
My Satellite Setup
dish 150 4 feed ku c lin c circ ka tbs 6925 tbs 5280
My Location
italy
after disassembling the smr 1224 engine i decided to restore it with a new paint, the engine was repaired in 2015 after a breakdown replacement of the hardware with steel bolts, I still have to finish it but I'm on the good road
 

Attachments

  • IMG_20210606_101825.jpg
    IMG_20210606_101825.jpg
    2.9 MB · Views: 36
  • IMG_20210606_102208.jpg
    IMG_20210606_102208.jpg
    3 MB · Views: 36
  • IMG_20210606_110117.jpg
    IMG_20210606_110117.jpg
    2.3 MB · Views: 34
  • IMG_20210606_110120.jpg
    IMG_20210606_110120.jpg
    2.5 MB · Views: 34
  • IMG_20210606_110129.jpg
    IMG_20210606_110129.jpg
    2.5 MB · Views: 33
  • IMG_20210606_120249.jpg
    IMG_20210606_120249.jpg
    1.7 MB · Views: 40
  • IMG_20210606_120404.jpg
    IMG_20210606_120404.jpg
    2 MB · Views: 63

cardiff

Regular Member
Joined
Mar 1, 2006
Messages
79
Reaction score
69
Points
18
Age
60
Location
Brittany
My Satellite Setup
Laminas As 1800, multifocus 14 LNB
My Location
France
Hello,

I knew something was wrong with my Jaeger SMR 1224 After cleaning the worm

I discovered that it was about to break. In addition this worm is very hard to disassemble and I did not succeed.
SMR 1224.jpg
I'm looking for someone who could find a solution to fix it or fix it for me.

Thank you all for your answers

Cardiff
 
Last edited:

cardiff

Regular Member
Joined
Mar 1, 2006
Messages
79
Reaction score
69
Points
18
Age
60
Location
Brittany
My Satellite Setup
Laminas As 1800, multifocus 14 LNB
My Location
France
Hello,

The broken worm has been repaired by Trust (golden hands)

I thank him very much.
worm repaired.jpg

The 2 equally defective ball bearings have been replaced.

The spigot has also been replaced since I had to drill it. Also made by Trust .
smr 1224.jpgsm 1224.jpg
Now everything is going well

Cardiff
 

dreambox1959

Specialist Contributor
Joined
Feb 7, 2009
Messages
406
Reaction score
539
Points
93
Age
64
Location
46.3N-4.3E-FRANCE
My Satellite Setup
Octagon SF8008 - technomate 7100
My Location
france
good news , we can go on ! i have made some improvements on my positioner program .
 
Top