Official UPC sub not clearing

[student]

Hi guys I have official Czech UPC sub card, I have previously used it in my DM7025 no problem with cccam. I have updated my image and the cam to newer version and its not working. The card has also been out of the receiver for while but I have phone UPC and they have send the new signal to the card twice already. I am just wondering if I am missing anything basic. The card is inserted chip down, and its cryptoworks.

Any tips welcomed, many thanks student

 

[HB13DISH]

Hi guys I have official Czech UPC sub card, I have previously used it in my DM7025 no problem with cccam. I have updated my image and the cam to newer version and its not working. The card has also been out of the receiver for while but I have phone UPC and they have send the new signal to the card twice already. I am just wondering if I am missing anything basic. The card is inserted chip down, and its cryptoworks.

Any tips welcomed, many thanks student

Take out the card from the slot, then shutdown the receiver with the remote, pull the power cord out, wait ten minutes, insert the card with the chip face down and see what happens when you select CCcam from the CAMs list.
You should also try to see the entitlements using a web browser and this link
_http://IP of box:16001
(without the _)
Click on entitlements
Hope this helps. Report back for more ideas if this doesn't work.

 

[student]

Thank you for the quick response. I have done as advised, and it didn’t work at first, but after few minutes the channels DO CLEAR! So excellent, thank you very much for the help.

 

[student]

I have looked at the entitlements, and had no idea what I was looking at.

Would you please take the time and shortly explain what they mean?

Many thanks again student

 

[HB13DISH]

I have looked at the entitlements, and had no idea what I was looking at.

Would you please take the time and shortly explain what they mean?

Many thanks again student

Glad to hear it worked for you.
Regarding the entitlements, attach a screen shot and I will tell you what it means.
Or better still, if you can select the text then copy > paste it. Just over type your card number for security reasons. (something like xxxxxxxx)

 

[student]

Thank you, here it is;


card reader /dev/sci0
handled 375(336) ecms and 838(524) emms
Cryptoworks card bios rev 5
Caid d02 UPC2
Cardserial XXXXXXXXXXXX
id chid stat date version name

card reader /dev/sci1
no or unknown card inserted
card reader /dev/sci2
handled 0(0) ecms and 0(0) emms
DreamCrypt card 21c96b47

 

[HB13DISH]

Thank you, here it is;


card reader /dev/sci0
handled 375(336) ecms and 838(524) emms
Cryptoworks card bios rev 5
Caid d02 UPC2
Cardserial XXXXXXXXXXXX
id chid stat date version name

card reader /dev/sci1
no or unknown card inserted
card reader /dev/sci2
handled 0(0) ecms and 0(0) emms
DreamCrypt card 21c96b47

You seem to have 3 card readers slots
The /scio means the UPC card is in the top card reader slot
/sci1 is the second card reader slot and is empty
/sci2 means there is another card in the third slot.

Anyway, this page doesn't show the validation dates.
I expected to see a line/lines with some dates. But there is none at this time.

Try again in few days and see if there is any update.

If you can get hold of a Cryptowork CAM module, you can use it in the CI slot and when the channels open, try to see the entitlements from the CAM menu