aceb
Specialist Contributor
- Joined
- Oct 2, 2007
- Messages
- 1,537
- Reaction score
- 841
- Points
- 113
- My Satellite Setup
-
Prof Tuner 7301 /
1.25m Gibertini + Inverto B.Ultra/C1W, Moteck H180, 68.5E-67W Ku/C-Band /
1.8m Precision PF + ESX241/Inverto Black Pro, 66E-63W Ku/C-band /
2.4m Fortec Star+Titanium C1W/Pride plate, 49E-58W
- My Location
- Sussex
I've finally fitted the motor to my 1m Gib and the F3 in the lounge, this should in theory give me 45E - 63W but I've hit a problem.
I can add 61W and 63W satellites and a couple of recently active transponders to them but when I select them there's a pause and a message pops up saying 'Out of Range!' and no motor movement. If I switch to diseqc motor I can manually drive it to the end of it's physical limit so it's not the motor but if I try to set it up as diseqc it still throws up the same error.
I've gone into antenna setup and disabled the limits so it's not that either, everthing upto 58W is fine. Can someone else try to store/select a satellite more than 60 degrees away from their local longitude to see if it's a bug?
I can add 61W and 63W satellites and a couple of recently active transponders to them but when I select them there's a pause and a message pops up saying 'Out of Range!' and no motor movement. If I switch to diseqc motor I can manually drive it to the end of it's physical limit so it's not the motor but if I try to set it up as diseqc it still throws up the same error.
I've gone into antenna setup and disabled the limits so it's not that either, everthing upto 58W is fine. Can someone else try to store/select a satellite more than 60 degrees away from their local longitude to see if it's a bug?