Triple dragon setup frustration!

retroaudio

Member
Joined
Feb 24, 2011
Messages
10
Reaction score
0
Points
1
Age
63
My Satellite Setup
Vu+ Duo, Technomate TM600, Protek 9600
Technomate Motor driving 90cm Dish
My Location
Derby
Hi Guys,

I've been out of the sat game for a few years but when I saw new TD's on ebay I thought I'd get one to try. It's a very nice piece of kit. I flashed it with tdman 2602 and noticed it already had Mgcamd installed. I got a line and created a newcamd.list file and in mg-cfg I edited parameter G to 01. Both these files are in /var/keys. I have checked many times but cannot get it to work. I have searched various forums because I now want to try an image without Mgcamd as standard and install it seperately. Which image should I use and which Mgcamd should I use? I also cannot find any post that describes the actual installation of the cam (it it just ftp to a directory or is it installed via the box) There is plenty of info regarding the config but not about the actual inatallation. I know these boxes are a blast from the past but I would really like to get it running. If anyone can dig through the archives I would be very grateful!

Thanks, Richard.
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,533
Reaction score
8,554
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
How did you get on with the V+ Duo last time you posted on this forum ?

 

retroaudio

Member
Joined
Feb 24, 2011
Messages
10
Reaction score
0
Points
1
Age
63
My Satellite Setup
Vu+ Duo, Technomate TM600, Protek 9600
Technomate Motor driving 90cm Dish
My Location
Derby
How did you get on with the V+ Duo last time you posted on this forum ?

As I remember this was a bit of a red herring and I believe other issues solved the problem. The Triple Dragon does seem to be a law unto itself!
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
Hi Guys,

I've been out of the sat game for a few years but when I saw new TD's on ebay I thought I'd get one to try. It's a very nice piece of kit. I flashed it with tdman 2602 and noticed it already had Mgcamd installed. I got a line and created a newcamd.list file and in mg-cfg I edited parameter G to 01. Both these files are in /var/keys. I have checked many times but cannot get it to work. I have searched various forums because I now want to try an image without Mgcamd as standard and install it seperately. Which image should I use and which Mgcamd should I use? I also cannot find any post that describes the actual installation of the cam (it it just ftp to a directory or is it installed via the box) There is plenty of info regarding the config but not about the actual inatallation. I know these boxes are a blast from the past but I would really like to get it running. If anyone can dig through the archives I would be very grateful!

Thanks, Richard.
Forget CS on the TD. Too flawed to work other than locally (or did). Just use the TD as a nice vintage SD box
 

retroaudio

Member
Joined
Feb 24, 2011
Messages
10
Reaction score
0
Points
1
Age
63
My Satellite Setup
Vu+ Duo, Technomate TM600, Protek 9600
Technomate Motor driving 90cm Dish
My Location
Derby
Forget CS on the TD. Too flawed to work other than locally (or did). Just use the TD as a nice vintage SD box
Llew I agree the TD is well passed it's sell by date but I have read of some success stories back in the day. I have been talking to the Hisat guy who has been very helpful. I suppose I'm treating this as a lockdown project but ultimately (as you say) it probably will end up as freeview box! In the meantime though I would like to carry on so if you know of any cam setup/installation guides that would be super duper. Cheers.
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,533
Reaction score
8,554
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
Hisat peddled the receiver as having 'HD like resolution'. :rolleyes:

Was there a terrestrial tuner version ?
 

retroaudio

Member
Joined
Feb 24, 2011
Messages
10
Reaction score
0
Points
1
Age
63
My Satellite Setup
Vu+ Duo, Technomate TM600, Protek 9600
Technomate Motor driving 90cm Dish
My Location
Derby
Hisat peddled the receiver as having 'HD like resolution'. :rolleyes:

Was there a terrestrial tuner version ?
No, I think this was the one and only box. I've never seen the DVD addon either! The SD quality is excellent, even through a humble scart lead! It is a well engineered box but I suppose the lack of third party support killed it off? As I said to Llew though, I would like to persevere with it a bit so I would like to get hold of any setup guides for cs, just as a project.
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
There was good support for the TD in its day. The JKF site was the one to go to, until the owner threw a wobbly and chucked us out. A German site too, although they banned discussion of the illegal aspect of CS (as we do).
I don't think I hold much softcam info that isn't in this section already, unless stuff is on another hard disk somewhere.
 

retroaudio

Member
Joined
Feb 24, 2011
Messages
10
Reaction score
0
Points
1
Age
63
My Satellite Setup
Vu+ Duo, Technomate TM600, Protek 9600
Technomate Motor driving 90cm Dish
My Location
Derby
There was good support for the TD in its day. The JKF site was the one to go to, until the owner threw a wobbly and chucked us out. A German site too, although they banned discussion of the illegal aspect of CS (as we do).
I don't think I hold much softcam info that isn't in this section already, unless stuff is on another hard disk somewhere.
Yes I have found good discussions on TD but thanks for your replies. Just one thing (then I'll leave you in peace!), could you clarify the installation process for mgcamd? Do I just copy the mips file into a directory (which one?), or is it installed from the box?

Thanks for your support and stay safe.
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
Yes I have found good discussions on TD but thanks for your replies. Just one thing (then I'll leave you in peace!), could you clarify the installation process for mgcamd? Do I just copy the mips file into a directory (which one?), or is it installed from the box?

Thanks for your support and stay safe.
Give me time (and a delve into my memory) and I'll see what I can come up with - it's years since I did much with the TD.
I'm sure the mips images had to be manually installed.
 

Llew

cerca trova...
Staff member
Joined
Jan 1, 2000
Messages
16,226
Reaction score
4,197
Points
113
Age
81
My Satellite Setup
Triple Dragon, Dreambox 8000, Echostar AD3000ip, TBS6522,6925,6983 PCie cards.
Gibertini 1.25m motorised dish driven by the AD3000, with either Inverto BU Quad or Norsat / XMW Ka LNBs . SMW 1.05m + 3 other dishes. Speccy: Promax HD Ranger+
My Location
The Flatlands of East Anglia
The official TD site (still up!) -


Find TDTool v.1.02. That's the app to flash your image.

Find the 'How To Guides' in this (our) TD section, and scroll down to 'How to update images etc.' for a guide on flashing an image.
 

retroaudio

Member
Joined
Feb 24, 2011
Messages
10
Reaction score
0
Points
1
Age
63
My Satellite Setup
Vu+ Duo, Technomate TM600, Protek 9600
Technomate Motor driving 90cm Dish
My Location
Derby
The official TD site (still up!) -


Find TDTool v.1.02. That's the app to flash your image.

Find the 'How To Guides' in this (our) TD section, and scroll down to 'How to update images etc.' for a guide on flashing an image.
Cheers mate, so far so good!
 

retroaudio

Member
Joined
Feb 24, 2011
Messages
10
Reaction score
0
Points
1
Age
63
My Satellite Setup
Vu+ Duo, Technomate TM600, Protek 9600
Technomate Motor driving 90cm Dish
My Location
Derby
Llew, I've just had a reply on another forum (not a very helpful one!) from someone who use to work for the Triple Dragon importers saying that because the TD is so old I'm wasting my time as it won't work? Hmmm.... I can't see cs being so different now and I'm sure many people bought it and got it working back then. My TD might be old but it's brand new out of the box. After all, I've got a 40 year old Betamax video that hasn't forgotten how to play tapes! Just for the record this is the only forum that has given me any real help although i'm not quite there yet! Thanks.
 

Topper

Amo Amas Amant Admin
Staff member
Joined
Nov 18, 2004
Messages
23,991
Reaction score
4,014
Points
113
Age
69
My Satellite Setup
Has gone to a good home elsewhere
My Location
Blackburn, Lancashire
Llew, I've just had a reply on another forum (not a very helpful one!) from someone who use to work for the Triple Dragon importers saying that because the TD is so old I'm wasting my time as it won't work? Hmmm.... I can't see cs being so different now and I'm sure many people bought it and got it working back then. My TD might be old but it's brand new out of the box. After all, I've got a 40 year old Betamax video that hasn't forgotten how to play tapes! Just for the record this is the only forum that has given me any real help although i'm not quite there yet! Thanks.
Brand new or not it is a simple fact that encryption security measures, to combat illegal viewing of satellite transmissions via key insertion and card sharing systems, has been beefed up considerably and is therefore not really of much interest to many people these days apart from people interested in the old processes, it is also something we do not condone. The offloading of obsolete brand new equipment of any description to people buying from Ebay is not uncommon these days. When I was a lad we used to call it being fleeced, my dad used to call the purveyors of such things wide boys, I am not really sure of the terminology of today.
 

retroaudio

Member
Joined
Feb 24, 2011
Messages
10
Reaction score
0
Points
1
Age
63
My Satellite Setup
Vu+ Duo, Technomate TM600, Protek 9600
Technomate Motor driving 90cm Dish
My Location
Derby
Brand new or not it is a simple fact that encryption security measures, to combat illegal viewing of satellite transmissions via key insertion and card sharing systems, has been beefed up considerably and is therefore not really of much interest to many people these days apart from people interested in the old processes, it is also something we do not condone. The offloading of obsolete brand new equipment of any description to people buying from Ebay is not uncommon these days. When I was a lad we used to call it being fleeced, my dad used to call the purveyors of such things wide boys, I am not really sure of the terminology of today.


Well put! (But for 16quid for the TD I thought i'd have a play with one)
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,533
Reaction score
8,554
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
You can have a nice new/old stock Humax SD unit for a tenner and I'll throw in a used but pristine Clarke Tech box.
 
Top