Recent content by rasp54

I have 2tb 2.5 in my vu box and i want to replace with a 2tb ssd.I have moved all videos to pc. I want to move files that are left on 2.5 to ssd

Getting there quietly got 19.2 e. with the rain and tragedy in the family had not had much time to do it will get there. Thank you for the replies

Because i marked the pole.motor and dish before removing them.

My system consist of vu+ ultimo 4k one fbc tuner, triax 80cm dish.TM 2600 MK3 and TM gold twin lnb both new. Installed them both set the motor to 0 . Put the dish back up. the tuner config i got is B is set to advanced and A is set to second cable of motorised dish is that right as the dish is...

Thanks anyway. Will i lose much changing from triax110cm to triax88cn dish to give me for space

Bridgend

This what i have done : Lowered the dish it was about a metre about the last t bracket i have a {24 in t bracket k bracket and t bracket} The dish is slightly out to get it back spot on i will have to install new T AND K Brackets the old one has been up twenty years. Any way moved the...

I have 1m triax motorized with with black ultra twin lnb in the heavy winds it moved a bit. Went up and tightened the bolts on dish as it was on hotbird i got the signal back by altering the elevation. I am getting 90% signal on hotbird but no signal on any other sats.16.0,19.2. 28.2. The...

Sorry guys the sat I'm on is 19.2 east and the channels I'm trying to open are premiere. I have left it on the transponder i got from kingofsat but nothing clears. Update i have loaded the latest magic patch and the softcam, and in the system info i have cas and biss now RASP54

Just had my 6900 delivered yesterday and been try to load patches etc but nothing opens: Here is what it says in the system settings: S. VERSION 6.53 JUN 2008. H/W VERSION 1.00 BOOT VERSION 1.00 CH VERSION F010 +STD01 Do i have to upgrade to a newer version and has it got be done via null...

In the antenna menu on the darkbox 2008 i have set. LNB TYPE UNNIVERSAL 1. Lb local freq 9750/10600 (greyed out) Disequ OFF. Positioner setting USALAS. I have put hotird,siruis,astra 19.2. I thought the darkbox controlled the vbox but nothing moves.

Just done it M8 the signal is going through the vbox even if its on standby

No i have not m8 but what i have done is cleared all the data on the echostar E/W LIMITS and SATS and reset them. found hotbird starting to rescan with 85% signal and 79% quality so the F type connector on the LNB is ok.Will try what you suggested next after i have remade the loop connector for...

No it does not i can move it manually with remote or buttons.

I have changed from A echostar 3000viaip 36vdc.TO DARKBOX 2008 and VBOX But i have a problem no signal from vbox to darkbox. If i put the echostar 3000viap back on and use as postioner signal and quality 93%. I was thinking it was the connectors F type but the same leads work fine on...