Ax 4kbox hd61 tuner sat uhd

4Himdj

Regular Member
Joined
Aug 19, 2013
Messages
136
Reaction score
53
Points
28
Age
41
My Satellite Setup
1.2 Laminas Dish
My Location
Rome
hello I've bought this new receiver because of the 2 CI slot + 1 card reader and I want to share some test I've made hope it can be appreciated:

1) It recognize a viaccess cam to watch rtv slovenia that doesn't work on other receiver also if the cam is pretty old. it does not need to assign anything on the menu as for other receivers. next test is to use 2 cam simultaneously. I hope I will check tonight with a CI+ cam.


2)4k channels works normally


3)multistream channels works normally


4)blind scan. in this test you can find turksat bs of FTA tp. since it does not find (for example) 12015 H trasponder I think I will not use this feature, that I suppose could be inaccurate. that tp can be scanned manually anyway.


5) the only thing for the moment I'm really dissapointed: tuner sensitivity (the feature I need the most). in these photo you can see very hard to catch FOX TV tp on turksat on AX HD 61 and on OCTAGON SX88+ (pretty good tuner sensitivity but inferior compared to other receivers). SX88+ gives at least a glitched video when ax hd 61 just glitched audio and no video. I will make other comparison about it as soon as I can

ax hd 61


sx88+


6) "rallenty" movement when you change channels but I thing it's a hisilicon feature

7) fastest boot I ever seen

8) from first test on astra 4,8 east zeonbud tp, t2-mi can not be scanned automatically

9) the receiver can scan symbol rate <1000 as you can see here (but if you try to scan symbol rate <200 it shows signal but it does not scan)


10) I can confirm 2 common interface can works simultaneously (other receivers can't). 1 Common interface + 1 CI+ was recognized automatically without any user operation

11) as it happens on other receivers hispasat 11496 H 7884 multistream tp have freeze (but it works normally on octagon sx88+)

more test will follow

best regards
 

4Himdj

Regular Member
Joined
Aug 19, 2013
Messages
136
Reaction score
53
Points
28
Age
41
My Satellite Setup
1.2 Laminas Dish
My Location
Rome
a point in favor for ax hd 61
other tuner sensitivity test shows smooth image on 30,5 east 12532 H 2000 when octagon sx88+ gives glitch

sx88+



ax hd 61


furthermore unlike what I wrote before I can confirm sx hd 61 can scan symbol rate lower than 200

regards
 

ymttt

Member
Joined
Jan 8, 2020
Messages
39
Reaction score
15
Points
8
Age
46
My Satellite Setup
5 meter fiber dish, modified mti highline lnb, tm5402 m3 receiver
My Location
Ghana, West Africa
hello I've bought this new receiver because of the 2 CI slot + 1 card reader and I want to share some test I've made hope it can be appreciated:

1) It recognize a viaccess cam to watch rtv slovenia that doesn't work on other receiver also if the cam is pretty old. it does not need to assign anything on the menu as for other receivers. next test is to use 2 cam simultaneously. I hope I will check tonight with a CI+ cam.


2)4k channels works normally


3)multistream channels works normally


4)blind scan. in this test you can find turksat bs of FTA tp. since it does not find (for example) 12015 H trasponder I think I will not use this feature, that I suppose could be inaccurate. that tp can be scanned manually anyway.


5) the only thing for the moment I'm really dissapointed: tuner sensitivity (the feature I need the most). in these photo you can see very hard to catch FOX TV tp on turksat on AX HD 61 and on OCTAGON SX88+ (pretty good tuner sensitivity but inferior compared to other receivers). SX88+ gives at least a glitched video when ax hd 61 just glitched audio and no video. I will make other comparison about it as soon as I can

ax hd 61


sx88+


6) "rallenty" movement when you change channels but I thing it's a hisilicon feature

7) fastest boot I ever seen

8) from first test on astra 4,8 east zeonbud tp, t2-mi can not be scanned automatically

9) the receiver can scan symbol rate <1000 as you can see here (but if you try to scan symbol rate <200 it shows signal but it does not scan)


10) I can confirm 2 common interface can works simultaneously (other receivers can't). 1 Common interface + 1 CI+ was recognized automatically without any user operation

11) as it happens on other receivers hispasat 11496 H 7884 multistream tp have freeze (but it works normally on octagon sx88+)

more test will follow

best regards
4Himj, have you made further comparisons between the sx88 and the ax61 on their sat tuner sensitivity since? In my experience one receiver can give glitch video while the other only gives a glitch audio without video but the pictures will be stable same time on both with little signal increase. Also have you or anyone come across any receiver with a more sensitive satellite tuner than these two?
 

4Himdj

Regular Member
Joined
Aug 19, 2013
Messages
136
Reaction score
53
Points
28
Age
41
My Satellite Setup
1.2 Laminas Dish
My Location
Rome
hello I've made other test. today I'll put more photos

regards
 

4Himdj

Regular Member
Joined
Aug 19, 2013
Messages
136
Reaction score
53
Points
28
Age
41
My Satellite Setup
1.2 Laminas Dish
My Location
Rome
hello here's my test:
in general Sillabs axhd 61 tuner (the same of various other enigma2 receiver) is better than the one on Octagon Sx88+ but sometimes this receiver gives image when axhd 61 fails.

30,5 East

LBC International HD
AX Hd 61


Octagon Sx88+


Sudan Tx
Ax Hd 61


Octagon Sx 88+ (video with no glitches)


For NBN Hd is the opposite
Ax Hd 61


Octagon Sx88+


42 East (please note lnb skew is not optimized for this position to increase signal on other satellite position)

NTV HD
Ax Hd 61 (scanned with no video)


Octagon Sx88+ (no signal)


52,5 East (11843 V 27500 East beam)

Ax Hd61


Octagon Sx88+ (no signal)


and no, I never had a better tuner than silabs 2166d (both on octagon 4008 or axhd 61)

regards
 

MCelliotG

Specialist Contributor
Joined
May 10, 2015
Messages
1,012
Reaction score
1,199
Points
113
My Satellite Setup
TBS 5925, Mut@nt HD51, EDISION OSMINI, MABO 130X144, DRAGONSAT DS3000 LED MOTOR, INVERTO BLACK ULTRA TWIN LNB
My Location
Thessaloniki, Greece
HD61, as HD51, as Axas, in general - with the exception of SF8008 - all use the same generic Silabs gfutures driver which did enable blindscan but is highly problematic on both very low SR (nothing comes below 250) and constellation detection (all constellations found are mapped to QPSK Auto and 16APSK is found in blindscan but impossible to scan directly).
Just compare Mars Radio with SR185 on 30W. Only SF8008 which uses a more updated Silabs driver can lock this, and blindscan works correctly. All other Silabs receivers have great problems. Since the support on all other STBs is dead, we can expect no better...
 

ymttt

Member
Joined
Jan 8, 2020
Messages
39
Reaction score
15
Points
8
Age
46
My Satellite Setup
5 meter fiber dish, modified mti highline lnb, tm5402 m3 receiver
My Location
Ghana, West Africa
hello here's my test:
in general Sillabs axhd 61 tuner (the same of various other enigma2 receiver) is better than the one on Octagon Sx88+ but sometimes this receiver gives image when axhd 61 fails.

30,5 East

LBC International HD
AX Hd 61


Octagon Sx88+


Sudan Tx
Ax Hd 61


Octagon Sx 88+ (video with no glitches)


For NBN Hd is the opposite
Ax Hd 61


Octagon Sx88+


42 East (please note lnb skew is not optimized for this position to increase signal on other satellite position)

NTV HD
Ax Hd 61 (scanned with no video)


Octagon Sx88+ (no signal)


52,5 East (11843 V 27500 East beam)

Ax Hd61


Octagon Sx88+ (no signal)


and no, I never had a better tuner than silabs 2166d (both on octagon 4008 or axhd 61)

regards
Thank you for your response, I ordered two receivers. The Octagon sf8008 and the AX HD 60. I was thinking the AX 61 and AX 60 had the same tuners. I am right in my thinking or the AX 60 is a bad purchase?
 

4Himdj

Regular Member
Joined
Aug 19, 2013
Messages
136
Reaction score
53
Points
28
Age
41
My Satellite Setup
1.2 Laminas Dish
My Location
Rome
Thank you for your response, I ordered two receivers. The Octagon sf8008 and the AX HD 60. I was thinking the AX 61 and AX 60 had the same tuners. I am right in my thinking or the AX 60 is a bad purchase?

tuner on ax's are the same but please make comparation on fringe signals between 8008 and ax hd 60 anyway

thank you
regards
 

4Himdj

Regular Member
Joined
Aug 19, 2013
Messages
136
Reaction score
53
Points
28
Age
41
My Satellite Setup
1.2 Laminas Dish
My Location
Rome
Thank you for your response, I ordered two receivers. The Octagon sf8008 and the AX HD 60. I was thinking the AX 61 and AX 60 had the same tuners. I am right in my thinking or the AX 60 is a bad purchase?
 

ymttt

Member
Joined
Jan 8, 2020
Messages
39
Reaction score
15
Points
8
Age
46
My Satellite Setup
5 meter fiber dish, modified mti highline lnb, tm5402 m3 receiver
My Location
Ghana, West Africa
I will compare and also against my tm 5402 hd m3. The two boxes will be my first Enigma 2 boxes. Will I need to connect to a PC before scanning. Hope i can just plug and scan channels. How do I access cccam and oscam on both boxes. Any software or procedure?
 
Top