Turok
Regular Member
- Joined
- Apr 25, 2005
- Messages
- 2,237
- Reaction score
- 2
- Points
- 38
- Age
- 36
- My Satellite Setup
-
1,25 Fibostop
Jäger Smr 1224 & Smo 36 Dual Axsis Motor
Dynasat F1
Monterey 140
Drembox 800
sky Pace HD Box
Tagra 2,20 M Fullsize Dish
Echostar 2,40m Mesh for cband!
- My Location
- Austria
Hello!
today i want change to enigmal 2 E2 on my azbox elite,after loading a internet image,that should be for my elite modell,i got the massage in the display,after load from usb stick,and running the usb rescue mode,over ethernet,the display shows gecko P :,az up says image installed okay,first before i run the az up tool,after usb flash,it show me 10.0.2 ip,after try to reflash another enigma,in show me VFD run,then the number on the display change to 25 ,and the box hangs at this time..
any ideas ,what i can do?
is now a jtag interface needed?
before,i use the upgrade with usb stick mode,i try to upgrade directly with azbox when the orginal software was installed,but at this time,it show me the massage,old kernel installed,you have to upgrade,how i can do this,but after the failed enigma 2 update massage not want come again!
thanks for your help!
today i want change to enigmal 2 E2 on my azbox elite,after loading a internet image,that should be for my elite modell,i got the massage in the display,after load from usb stick,and running the usb rescue mode,over ethernet,the display shows gecko P :,az up says image installed okay,first before i run the az up tool,after usb flash,it show me 10.0.2 ip,after try to reflash another enigma,in show me VFD run,then the number on the display change to 25 ,and the box hangs at this time..
any ideas ,what i can do?
is now a jtag interface needed?
before,i use the upgrade with usb stick mode,i try to upgrade directly with azbox when the orginal software was installed,but at this time,it show me the massage,old kernel installed,you have to upgrade,how i can do this,but after the failed enigma 2 update massage not want come again!
thanks for your help!