craignigel
Member
- Joined
- Nov 24, 2008
- Messages
- 52
- Reaction score
- 1
- Points
- 8
- Age
- 74
- My Satellite Setup
- 1.4m PF Fagor fixed dish Invacom quad C120 LNB. Amstrad SD Sky Rx 1 feed with Sky Subs. 2nd feed via DISEqC switch to my DB500S, 3rd to a Ross HD Rx.The switch also connects my 1m dish with a Motsat3 motor to DB. Satlook Micro G2 meter
- My Location
- Los Balcones, Torrevieja, Alicante, Spain and Moortown Leeds UK
Hi
I posted about using a DiSEQC switch on my DB500 in a low signal area, about 4 weeks ago. I have this installed and working fine without any obvious signal loss.
I have now bought a DiSEQC motor here in Spain (MOTOSAT3) and I have installed it on my smaller dish. Can someone please point me in the right direction in the DB Motor setup menu? I have read the guides and looked back through many posts but I am not sure how to distinguish between my two dishes.
Previously some members suggested that it may be possible to use both a switch and a motor on a 500 but were unsure how to do it as there is not a specifc option in the motor setup for both.
I use Gemini & CCam v 2.0.10 on the DB.
Thanks
Bob
I posted about using a DiSEQC switch on my DB500 in a low signal area, about 4 weeks ago. I have this installed and working fine without any obvious signal loss.
I have now bought a DiSEQC motor here in Spain (MOTOSAT3) and I have installed it on my smaller dish. Can someone please point me in the right direction in the DB Motor setup menu? I have read the guides and looked back through many posts but I am not sure how to distinguish between my two dishes.
Previously some members suggested that it may be possible to use both a switch and a motor on a 500 but were unsure how to do it as there is not a specifc option in the motor setup for both.
I use Gemini & CCam v 2.0.10 on the DB.
Thanks
Bob