Dish will not turn west, help please

jeallen01

jeallen01

Specialist Contributor
Joined
Oct 12, 2003
Messages
6,674
Reaction score
2,630
Points
113
My Satellite Setup
See Signature
My Location
Somewhere in England (possibly?)!
FWIW, I have never needed to move the limit switches on either of the Alsat motors, and so I never have.

OTOH, this part of the thread has made me consider whether it might be worth trying that on the dish with the Gibby on it to see if the "apparent limit of reception" at around is actually a hard limit stop, and not just the edge of the roof of the house behind our property?. Main issue there would however be the need to remove the dish from the motor - and that's a problem because of the size & weight, and so I suspect it won't be done!
 
G

greencajun

Member
Joined
Jul 6, 2020
Messages
45
Reaction score
7
Points
8
Age
46
My Satellite Setup
Ferguson 120E
My Location
Slovakia
a33 said:
And did the same reset, also work on the other motor?
Click to expand...
So, I finally had a chance to try the old motor. The fix that got the new motor working again (pressing the manual East and West buttons simultaneously for 5 seconds) did not work with the old motor. However, it appears that the local guy was right, he said the problem was that a West limit had been set with the dish pointing at 28E, because when I selected Disable Limits all was good, the motor once gain started turning westward as it should.

I may have wasted money for a new motor but I learned something and now have a spare motor.

Thanks to all for the help!
 
Lazarus

Lazarus

Retired Moderator
Joined
May 29, 2009
Messages
27,083
Reaction score
8,671
Points
113
My Satellite Setup
80cm Motorised.
Several small Dishes.
Much else.
My Location
North York Moors
Glad you're finally sorted.

All sensible hobbyists have a spare motor!
 
A

a33

Specialised Contributor
Joined
Sep 24, 2009
Messages
1,252
Reaction score
720
Points
113
Age
63
My Satellite Setup
XSAT410
Rebox RE-9000
My Location
The Netherlands
Well, good local guy you have there! :)

I'll remember the disable limits option, for cases like these, for the future.

Still strange, that the limit was set anyway. And not only once, but twice, with your two motors....

Greetz,
A33
 
G

greencajun

Member
Joined
Jul 6, 2020
Messages
45
Reaction score
7
Points
8
Age
46
My Satellite Setup
Ferguson 120E
My Location
Slovakia
a33 said:
Still strange, that the limit was set anyway. And not only once, but twice, with your two motors....
Click to expand...
Two motors but one receiver, I suppose the receiver imposed the west limit on both motors. The strange thing is that I was moving the new motor westward without problems for the first 30 minutes and then it stopped going west (except with the Go to Reference command) until the reset. The only explanation I can think of is that the limit only activated when the motor was turned east of the west limit (when I moved the dish to 28E). And all this assumes that the Go to Reference command is not affected by any limit set, as the local guy believes. And as you say, very strange that any limit at all was set, I definitely did not set it.
 
Top