Log in
Register
Menu
Log in
Register
Home
What's new
Latest activity
Authors
Forums
New posts
Search forums
What's new
New posts
Latest activity
Members
Current visitors
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Satellite TV receivers & systems support forums
DISH SETUP: Single sat, Multi-Sat & Motorised
Enigma2 With Motorised Twin LNB and Fixed 28.2 dish.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Mickha" data-source="post: 1074826" data-attributes="member: 187442"><p>First stick to the motorized dish, take the cable, illustrated in green. from the LNB to the motor, it should have LNM in, or something similar, on it, then run a cable from the motor, to the Diseqc switch, and run a cable from the Diseqc switch to your receiver.</p><p>At this point disconnect the cable, from the Astra 2 dish, from the Diseqc switch.</p><p></p><p>Next set up Tuner A, to Advanced configuration, select a satellite, e.g. Astra 1, 19.2E, and input the settings LNB 1, Diseqc 1.2, and use USALS for this satellite. Next add a few other satellites and check if the motor is working correctly.</p><p>You can also try recording, and viewing other transponders, on the same satellite, to see if both tuners are working.</p><p>Once you have this working connect the cable, from the Astra 2 dish, to the Diseqc switch and set this up as LNB 2.</p></blockquote><p></p>
[QUOTE="Mickha, post: 1074826, member: 187442"] First stick to the motorized dish, take the cable, illustrated in green. from the LNB to the motor, it should have LNM in, or something similar, on it, then run a cable from the motor, to the Diseqc switch, and run a cable from the Diseqc switch to your receiver. At this point disconnect the cable, from the Astra 2 dish, from the Diseqc switch. Next set up Tuner A, to Advanced configuration, select a satellite, e.g. Astra 1, 19.2E, and input the settings LNB 1, Diseqc 1.2, and use USALS for this satellite. Next add a few other satellites and check if the motor is working correctly. You can also try recording, and viewing other transponders, on the same satellite, to see if both tuners are working. Once you have this working connect the cable, from the Astra 2 dish, to the Diseqc switch and set this up as LNB 2. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Satellite TV receivers & systems support forums
DISH SETUP: Single sat, Multi-Sat & Motorised
Enigma2 With Motorised Twin LNB and Fixed 28.2 dish.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top