Help setting Up DM600

saygi

Member
Joined
Jan 15, 2010
Messages
5
Reaction score
0
Points
0
Age
43
My Satellite Setup
Dreambox 600-S
Windows 7 x64
My Location
United Kingdom
Hi, every one. how are you.

I got my dreambox 600 delivered to UK today from atendo.de :)

I've been using technomate, as a receiver for long time and I had no problem with it.

Here's my Settings from technomate recever:
- Satellite Setup -
LNB Power: ON
LNB Type: Universal
LNB Freq: 9.750 / 10.600
22Khz: AUTO
DISEqc 1.0: OFF
DISEqc 1.1: OFF

- Motor Setup -
Satellite: 42.0E Turksat 1C
Transponder: 12.652(H)/22500
DISEqc Motor: 1.2


and here's my setting for the DM600:
- Motor Config Page1 -
Unchecked Use gotoXX Function
Number In Motor: 1
Orbital Position: 420
Direction: East

- Motor Config Page2 -
Mode: Position
Satellite: Turk-/Eurasiasat
Transponder: 11920 V 24440
SNR: 64%
AGC: 77


- LNB Configuration Page 1-
Set/LNB mapping: LNB0
LOF/L: 11300
LOF/H: 11300
Threshold: 11700
Increased voltage (UNCHECKED)

- LNB Configuration Page 2-
Toneburst: None
DESEqc Mode: Version 1.2
DISEqc Parameter: A/A
DISEqc Repeats: None
Unxommited Switch: None
Squence repeat + Fast DISEqc and Swap Commands (UNCHECKED)


- Satellite Configuration -
non-standard user defined configuration...
Sat/Position: Turk-/Eurasiasat
LNB: 0
22Khz HI/Lo
Voltage: H/V

I did not setup technomate myself it was done by the engineer, so i played with setting on DM600 I get signal but when I do a channel scan it does not find anything.

please help.
 

shumifan50

Regular Member
Joined
Sep 6, 2007
Messages
521
Reaction score
1
Points
0
Age
75
My Satellite Setup
2xDM7025(DVB-S tuner), DM600SPVR, DM800S, DM500S HD, Triax 90cm with MultiBracket 4 sats.
My Location
Europe
These listings do not provide enough informatiom.
1. Do you actually use a motor?
2. Which motor do you use?

It looks to me like you are aimed at a single satellite. If you are not then you will have to allign the motor to roughly 0degree in UK by manually diving it and then tell the DM which satellite you are pointing at. Using USALS it should then be able to work out the rest of the satellites.

Having said the above - I dont use a motor, I use Diseqc switches as they switch satellite immediately - you dont have to wait for the motor to move the dish. The downside is a limited number of satellites, but I have the 4 I am interested in.
 

saygi

Member
Joined
Jan 15, 2010
Messages
5
Reaction score
0
Points
0
Age
43
My Satellite Setup
Dreambox 600-S
Windows 7 x64
My Location
United Kingdom
Hi, shumifan50. I finally got it work.

it's motorized dish on a single lnb, i normally use astra2, turksat and hotbird etc...

Diseqc switches are faster, I used them before like you said is limited.

thanks anyway for your help.
 
Top