Ikawa
Member
- Joined
- Mar 25, 2010
- Messages
- 29
- Reaction score
- 0
- Points
- 0
- Age
- 62
- My Satellite Setup
- ?
- My Location
- Netherlands
Analoguesat said:Get yourself a copy of pixresizer - its free and allows you to manipulate image sizes easily.
I can see the problem - you have 2 lnb's (the bits on the end of the dish arm) therefore you have to set the disecq switching up on the receiver.
Its possible the lnb's have been set up the other way round to what they were before.
Go into the receiver menu and look for the antenna settings - somewhere in there will be the disecq switch settings.
Write down what the current settings are then swap the A & B settings around, saving the changes.
Tivù said:You also need to assign the second LNB (for 28E) to DiSEqC B.
Ikawa said:theres no option for me to pick the first LNB or the 2nd LNB.
Ikawa said:...and i just noticed while checking it has no cable in the LNB output.