Reply to thread

Message

<blockquote data-quote="QBOXHD" data-source="post: 639766" data-attributes="member: 332148">Santo, that is good news that you are up and running, you know that Duolabs are bringing out a new S2-Tuner, will you be able to plug that into your QBOX-HD and take out the Horizontal one, I thought they were supposed to upgrade all you guys who had the horizontal Tuners !!.T_G,Interesting point about the new files system then, is it possible to load&nbsp; an older version of the file system on using the newer bootloader after you installed the newer version of the the new Webcourier image.I am currently downloading it, it is BIGGGGG. 193 people including myself have downloaded it so far. There is a lot of stuff for Germany and a lot of it will be useless to me. But I will give it a try anyway, I have problems upgrading the firmware using the USB with an image direct from Duolabs, but if I copy one of these images like webcouier onto the USB stick it will work have you ever seen this problem using Duolabs images ?.&nbsp; I used the one from the Nabilosat site to upgrade yesterday and it is working fine, except for the flashing LED's when you go into Standby mode, I had a phone call from Air Traffic Control to turn it off, it was distracting the Pilots on their approach to the Airport.qboxhd</blockquote>

[QUOTE="QBOXHD, post: 639766, member: 332148"] Santo, that is good news that you are up and running, you know that Duolabs are bringing out a new S2-Tuner, will you be able to plug that into your QBOX-HD and take out the Horizontal one, I thought they were supposed to upgrade all you guys who had the horizontal Tuners !!. T_G, Interesting point about the new files system then, is it possible to load an older version of the file system on using the newer bootloader after you installed the newer version of the the new Webcourier image. I am currently downloading it, it is BIGGGGG. 193 people including myself have downloaded it so far. There is a lot of stuff for Germany and a lot of it will be useless to me. But I will give it a try anyway, I have problems upgrading the firmware using the USB with an image direct from Duolabs, but if I copy one of these images like webcouier onto the USB stick it will work have you ever seen this problem using Duolabs images ?. I used the one from the Nabilosat site to upgrade yesterday and it is working fine, except for the flashing LED's when you go into Standby mode, I had a phone call from Air Traffic Control to turn it off, it was distracting the Pilots on their approach to the Airport. qboxhd [/QUOTE]

Verification