TP appearing over a 10 degree search

N

namracyor

Member
Joined
Feb 21, 2021
Messages
15
Reaction score
8
Points
3
Age
80
My Satellite Setup
8 Satellite receivers, Echostar AD 3600 IP solely used as the dish mover. Technamate TM 6900 Combo, Amiko Alien 2 Spark Triplex, Edision Piccollo s2-T2/C, Technomate TM 8000 Combo, Amiko-X-Finder 2, Octagon SF 8008 +4K, ab Cryptobox 752HD. 1.2 metre Channel Master dish with a twin Invert Tech .2db LNB. 2 computer set up consisting of 2 HP Desktops. Multiple switching units and HDMI splitters.
My Location
Near Dorking
I am getting a strong signal at 10746 H 32000 Auto on this satellite yet both Lyngsat and FlySat register the lowest frequency for this satellite at 10950.

The nearest possible satellite that is registered as starting at 10700 is KazSat 3 at 58.5 East.

The TP appears active over a 10 degree search.

Any ideas?
 
N

namracyor

Member
Joined
Feb 21, 2021
Messages
15
Reaction score
8
Points
3
Age
80
My Satellite Setup
8 Satellite receivers, Echostar AD 3600 IP solely used as the dish mover. Technamate TM 6900 Combo, Amiko Alien 2 Spark Triplex, Edision Piccollo s2-T2/C, Technomate TM 8000 Combo, Amiko-X-Finder 2, Octagon SF 8008 +4K, ab Cryptobox 752HD. 1.2 metre Channel Master dish with a twin Invert Tech .2db LNB. 2 computer set up consisting of 2 HP Desktops. Multiple switching units and HDMI splitters.
My Location
Near Dorking
Sorry should have stated a start point, about 65 East to beyond 58 East.
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,600
Reaction score
8,578
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
It could be a spurious output from the equipment, but low elevation suggests breakthrough at the IF stage , terrestrial source into the incoming cable, or f-plug

What LNB you are using ?
 
N

namracyor

Member
Joined
Feb 21, 2021
Messages
15
Reaction score
8
Points
3
Age
80
My Satellite Setup
8 Satellite receivers, Echostar AD 3600 IP solely used as the dish mover. Technamate TM 6900 Combo, Amiko Alien 2 Spark Triplex, Edision Piccollo s2-T2/C, Technomate TM 8000 Combo, Amiko-X-Finder 2, Octagon SF 8008 +4K, ab Cryptobox 752HD. 1.2 metre Channel Master dish with a twin Invert Tech .2db LNB. 2 computer set up consisting of 2 HP Desktops. Multiple switching units and HDMI splitters.
My Location
Near Dorking
Inverto Black Tech 0.2db. Channel Master 1.2 Dish. Receiver ab CryptoBox 752HD.
 
N

namracyor

Member
Joined
Feb 21, 2021
Messages
15
Reaction score
8
Points
3
Age
80
My Satellite Setup
8 Satellite receivers, Echostar AD 3600 IP solely used as the dish mover. Technamate TM 6900 Combo, Amiko Alien 2 Spark Triplex, Edision Piccollo s2-T2/C, Technomate TM 8000 Combo, Amiko-X-Finder 2, Octagon SF 8008 +4K, ab Cryptobox 752HD. 1.2 metre Channel Master dish with a twin Invert Tech .2db LNB. 2 computer set up consisting of 2 HP Desktops. Multiple switching units and HDMI splitters.
My Location
Near Dorking
I live near a railway, and a mobile phone mast. The Amiko-X-Finder spectrum analyser registers the signal but doesn't download to the data base. On the ab CryptoBox it is showing as a data feed because I am getting two channels at the same frequency, the second reads 10746 H 3200/Auto/M:0 .
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,600
Reaction score
8,578
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
namracyor said:
I live near a railway, and a mobile phone mast. The Amiko-X-Finder spectrum analyser registers the signal but doesn't download to the data base. On the ab CryptoBox it is showing as a data feed because I am getting two channels at the same frequency, the second reads 10746 H 3200/Auto/M:0 .
Click to expand...
Assuming the LNB is working correctly you should be looking for a signal of around 994-998MHz , 996MHz is a common frequency for circuitry within multiswitches (and from memory) some commercial UHF repeaters.
 
N

namracyor

Member
Joined
Feb 21, 2021
Messages
15
Reaction score
8
Points
3
Age
80
My Satellite Setup
8 Satellite receivers, Echostar AD 3600 IP solely used as the dish mover. Technamate TM 6900 Combo, Amiko Alien 2 Spark Triplex, Edision Piccollo s2-T2/C, Technomate TM 8000 Combo, Amiko-X-Finder 2, Octagon SF 8008 +4K, ab Cryptobox 752HD. 1.2 metre Channel Master dish with a twin Invert Tech .2db LNB. 2 computer set up consisting of 2 HP Desktops. Multiple switching units and HDMI splitters.
My Location
Near Dorking
A Friend has just checked with Intelsat. 62 East is operating at 10750. FlySat registers a TP @ 10808. I am now on my way to Specsavers!
 
Channel Hopper

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,600
Reaction score
8,578
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
namracyor said:
A Friend has just checked with Intelsat. 62 East is operating at 10750. FlySat registers a TP @ 10808. I am now on my way to Specsavers!
Click to expand...
Save a few quid, open another bottle and check again in the morning.
 
Top