Vantage 7100TS channel & Settings editor

castman

Member
Joined
May 4, 2007
Messages
2
Reaction score
0
Points
0
Age
69
My Satellite Setup
Vantage HD7100TS
1m Als*t dish & Technomate TS2300 motor
Sky+HD
Diablo 2.3 lite
+ usual loaders / cards / CAMs
My Location
U.K.
Is it me or is the downloadable channel editor and settings editor a fairly useless piece of kit?

To start with they appear to be the same thing with a slightly different interface

Editing of channels seems limited to say the least and no obvious way to say, add or move a channel. The only thing I can see that you can do is change the PIDS etc of channels.

Also on their site is the downloadable channel list:
Kanalliste File, 721.97 KB
Kanalliste mit Bundesliga5 ( laut satcodx ) File, 721.97 KB
Kanalliste File, 721.97 KB

if you download any of these and read them in the aforementioned program, they're all the same and the only stallite with any channels listed is Astra 1E-2C all the others read 'No Channels'

What's going on? can anyone explain? :confused
 

manowar

Member
Joined
Jun 1, 2008
Messages
21
Reaction score
0
Points
0
Age
68
My Satellite Setup
Nanoxx 9500 HD, Vantage 7100S, Octagon 1018HD, Interstar 890
My Location
Poland
They are very similar and have same interface. channel editor lets you upload firmware through RS-232 port.. Never tried to add channel but moving is very easy -- you need to highlight them, use CTRL+X and move cursor to the dresired position and then use CTRL+C
 
Top