Best lnb for sky mini dish

Icemen786

Member
Joined
Jan 5, 2021
Messages
65
Reaction score
4
Points
8
Age
49
My Satellite Setup
Sky uk
My Location
West Midlands
The lnb has arrived and as i said the labgear and the visiblewave look the same, confirmed they are the same as came in labgear box but on the lnb has visiblewave inprinted on it. Also i did say its a 40mm as per the description on the amazon add.
My old 40mm adapter has worked but it was that weather worn that it has cracked still holds the lnb but will have to look to either get another 40mm adapter, any1 know where i can get one? Or will try get a mark 4 arm which is a little thinner will work with the adaptor that came with it.
Lets see how it performs in the rain, if not glitch then job well done for 15 quid.
 
Last edited:

ozumo

te wo tsuite
Staff member
Joined
May 26, 2020
Messages
5,205
Reaction score
2,610
Points
113
My Satellite Setup
Raven mk2 zone 2 x4, Channel Master: 90cm x3, 1.2m x2, 1.8m PF. CM polar mount x2, Az/El x3.
My Location
South Durham
Is it not possible to glue it? I may have a spare mk2 holder but it too will be badly weathered.
 
Last edited:

jeallen01

Specialist Contributor
Joined
Oct 12, 2003
Messages
6,674
Reaction score
2,630
Points
113
My Satellite Setup
See Signature
My Location
Somewhere in England (possibly?)!
Will this work? Its 37mm but if i use top of the clip that came with the lnb might work?

Is it not possible to glue it? I may have a spare mk2 holder but it too will be badly weathered.
Good old-fashioned nylon cable ties could a quick and decent "solution" - and easily "reversible" if a more permanent solution is found. :D
 

Icemen786

Member
Joined
Jan 5, 2021
Messages
65
Reaction score
4
Points
8
Age
49
My Satellite Setup
Sky uk
My Location
West Midlands
Is it not possible to glue it? I may have a spare mk2 holder but it too will be badly weathered.
It's the other side from the screw. The swing arm. I might try some super glue. If u can have a look 4 me pls. Is it 40mm ?
 

ozumo

te wo tsuite
Staff member
Joined
May 26, 2020
Messages
5,205
Reaction score
2,610
Points
113
My Satellite Setup
Raven mk2 zone 2 x4, Channel Master: 90cm x3, 1.2m x2, 1.8m PF. CM polar mount x2, Az/El x3.
My Location
South Durham
It's the other side from the screw. The swing arm. I might try some super glue. If u can have a look 4 me pls. Is it 40mm ?

It will be 40mm - it came with the dish and had extra plastic bits to limit the skew but I ground them off so universal LNBs could fit.
 

Icemen786

Member
Joined
Jan 5, 2021
Messages
65
Reaction score
4
Points
8
Age
49
My Satellite Setup
Sky uk
My Location
West Midlands
Its raining and im not getting glitching which is plus side
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,608
Reaction score
8,579
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
Based on the pictures in this post


you are doing well.

There are adapters for the early dishes from certain outlets, but they would be more expensive than a new dish - delivered - from better suppliers, which the Labgear stuff slots straight onto.
 

jeallen01

Specialist Contributor
Joined
Oct 12, 2003
Messages
6,674
Reaction score
2,630
Points
113
My Satellite Setup
See Signature
My Location
Somewhere in England (possibly?)!
It will be 40mm - it came with the dish and had extra plastic bits to limit the skew but I ground them off so universal LNBs could fit.
A half-round metal rasp-type file would be pretty good for quickly removing the ridges in the LNB clamp to enlarge the internal diameter (I think I may have done that at some time in the past).
 

ozumo

te wo tsuite
Staff member
Joined
May 26, 2020
Messages
5,205
Reaction score
2,610
Points
113
My Satellite Setup
Raven mk2 zone 2 x4, Channel Master: 90cm x3, 1.2m x2, 1.8m PF. CM polar mount x2, Az/El x3.
My Location
South Durham
The internal diameter was 40mm to begin with, I used a Dremel type tool with a small grinding stone to remove the bumps that slotted into the guides on the LNB.
 

Icemen786

Member
Joined
Jan 5, 2021
Messages
65
Reaction score
4
Points
8
Age
49
My Satellite Setup
Sky uk
My Location
West Midlands
Update,
Still getting glitching on some asian channels. Even when the weather is clear. Looking at the signal it show 85% then drops to zero flicking betwen zero and back up which is causing the glitch.
Next thing now im going to change the cable to webro wf100 twin cable, see if that helps. Might be a damaged cable.
Thanks
 

Gladstones

Member
Joined
May 11, 2020
Messages
640
Reaction score
167
Points
43
My Satellite Setup
Zone 2 Fixed @ Astra 2
Gibertini XP 1 meter motorised
Technomate TM2600
Inverto Ultra Black
LG 55 UH770V
Octagon SX88+SE
XCRUISER XDR785HDR Avant Android 4K
My Location
Midlothian
Update,
Still getting glitching on some asian channels. Even when the weather is clear. Looking at the signal it show 85% then drops to zero flicking betwen zero and back up which is causing the glitch.
Next thing now im going to change the cable to webro wf100 twin cable, see if that helps. Might be a damaged cable.
Thanks
Yes it can be cable and loose f connector Did you check the alignment of the dish
 

Icemen786

Member
Joined
Jan 5, 2021
Messages
65
Reaction score
4
Points
8
Age
49
My Satellite Setup
Sky uk
My Location
West Midlands
No not checked alignment yet. Is there a good alignment cheaper thats not that expensive?
 

ozumo

te wo tsuite
Staff member
Joined
May 26, 2020
Messages
5,205
Reaction score
2,610
Points
113
My Satellite Setup
Raven mk2 zone 2 x4, Channel Master: 90cm x3, 1.2m x2, 1.8m PF. CM polar mount x2, Az/El x3.
My Location
South Durham
Something like this:
Code:
https://www.amazon.co.uk/Satellite-Finder-Signal-Meter-Patch/dp/B002R5UP1A/
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,608
Reaction score
8,579
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
It might be too much signal .....
 

Icemen786

Member
Joined
Jan 5, 2021
Messages
65
Reaction score
4
Points
8
Age
49
My Satellite Setup
Sky uk
My Location
West Midlands
Too much signal? Can there be such a thing?
It was twin cable so i swapped the cable from my sat box with the one that was going into my tv and its stopped glitching. Must be loose connection or cable what you recon?
 

ozumo

te wo tsuite
Staff member
Joined
May 26, 2020
Messages
5,205
Reaction score
2,610
Points
113
My Satellite Setup
Raven mk2 zone 2 x4, Channel Master: 90cm x3, 1.2m x2, 1.8m PF. CM polar mount x2, Az/El x3.
My Location
South Durham
Yes you can overload the tuner with too much signal, but as you've demonstrated it looks like the cable is the problem.
 

Icemen786

Member
Joined
Jan 5, 2021
Messages
65
Reaction score
4
Points
8
Age
49
My Satellite Setup
Sky uk
My Location
West Midlands
Just ordered some webro wf100 cable. Will the genuine cable have webro wf100 on the outside?
Which are the best f connectors or will screwfix one be ok?
Thanks
 

Channel Hopper

Suffering fools, so you don't have to.
Staff member
Joined
Jan 1, 2000
Messages
35,608
Reaction score
8,579
Points
113
Age
59
Website
www.sat-elite.uk
My Satellite Setup
A little less analogue, and a lot more crap.
My Location
UK
Just ordered some webro wf100 cable. Will the genuine cable have webro wf100 on the outside?
Which are the best f connectors or will screwfix one be ok?
Thanks
Webro is Webro
 

Icemen786

Member
Joined
Jan 5, 2021
Messages
65
Reaction score
4
Points
8
Age
49
My Satellite Setup
Sky uk
My Location
West Midlands
I get that but what i meant was will I be able to determine if its fake cable?
Also will these f connectors do the job?
 
Top