Thank you!!! By doing thatvI realised that the symbol rate was wrong. Strangely it was set on both the TM and the Humax to 27500 instead of 29500. By setting it up as 11774 I entered correctly the symbol rate.
The strange thing is that the Humax was still showing the channel although the TP had...
Yes I will leave it for now, I cannot complain as the signal is much stronger on all other channels - I now remember that my previous LNB started loosing frequencies before packing up.
For the records I tried swapping he receivers and that made no change.
I will upload a photo of the current...
Thank you. Correct. On the Humax I can see DW on the frequency but I cannot search channels on that frequency as it will not find any channels. On the Technomate I can manually add DW on that frequency and the manually set channel shows the image for 3 seconds then stops. I will swap receivers...
Its actually watchable and if i manualy set it up on the technomate the audio and video (not just the audio as I said before I needed to change the codec) show for 3 secs.
Is it possible that less signal meant less interreference?
To add to the mystery I have added DW manually on the Technomate and when I tune on the channel I can hear the audio for 3 seconds before it cuts off. Sounds like your suggestion of the interference is valid.
Thank you. Probably some reflection then.
I try changing the LNB and still not enough signal.
It’s not a big deal not to have that transponder but I am curious to figure out why when I had less signal in other transponders 11778V was tu able and now with more signals on other transponders it is...
After touching the skew I now have a much stronger signal on those but still no 11778V strangely.
11686V 12dB up to 13.5db
11758H 14.1dB up to 15.4dB
11686V 12dB up to 13.4db
11817V 11.8dB up to 14.6db