I'm quite surprised to lock quite a few of the Badr-8 BSS MENA transponders on my Gibertini 1.2m dish, 40km NW of central London.
Weakest signal that I can lock on my SF8008 is 11747V at 4.0db with some BER but only a little breakup.
It is actually not raining for the first time in a while...
Does anyone know of a way to use LPCM audio on an Enigma2 box (e.g. SF8008/OpenATV)?
Just comes though as silence for me, both to a TV via HDMI and streaming to VLC - but that may be all there is on the LPCM stream.
Quite a few feeds eem to have 3 MPEG audio streans and one LPCM.
Zap Viva comes in on its new frequency (12735V4000, multistream 171) at 12.8db on my Gibertini 1.25 - 35km NW of central London.
ORTC comes in at 12.0db.
Feeds for France Télévisions:
F503/TDF/ARRIVEE FEED1 - 11662 V 7200 (4:2:0)
F503/TDF/ARRIVEE FEED2 - 11671 V 7200 (4:2:0)
Regular France 3 programming before the off, then the race.
English commentary on audio 3 and audio 5
@ozumo
Thanks, I'll give it a go then.
The T55 is really helping clear out my box of old LNBs!
(For anyone reading the first post, the 3rd T55 LNB is on 5w not 5e. 5e on such a small dish would be really magic.)
I think my question is on the relationship of insertion loss db and SNR db (if any!).
One of my setups is currently a ~30 metre cable run to a Diseqc 1.0 4 port switch which has a USALS Diseqc 1.2 motor on port A and a further ~8 meters run to 3 LNBS on a toroidal Wave Frontier T55 using switch...
The breakup problem was fixed through some Enigma2 settings,
- CI Operation Mode = CI Plus 1.2 and
- High Bitrate Support = Yes
No sign of life on the Fransat authorisations :(
This thread prompted me to checkout my Fransat cards.
I currently have 2 Fransat PC6 cards:
1. Pre 4-year life restriction - the rolling Fransat authorisation had expired in March, doesn't seem to want to come back to life in Oscam or in a Neotion/Fransat CAM in an OpenATV VU+ Zero 4K (my...
It is a bit of a minefield!
V Bolt - extra long 3" V bolt STAINLESS (M8) - A.T.V. Poles, Brackets, Clamps & Aerials seems to be "inner diameter" of 3" or 80mm.
It might work if cut of the excess :)
Thanks all
I've taken a punt on one of the Ebay 3/8" V bolts. I may need to file out the holes on the clamp and the shackle a little.
Here's a pic of the original part:
Looking for a V-bolt to fix a Stab HH120 motor to a pole. I have one but the other is missing.
Internal width between the legs is 3" or 76mm, straight section of leg is about 80mm. Bolt is M8.
I have a square U-bolt which would do but think the V-bolt would be better/stronger and less likely...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.