Spiff
Regular Member
- Joined
- May 28, 2015
- Messages
- 608
- Reaction score
- 308
- Points
- 63
- Age
- 78
- Location
- Mullion Cove Cornwall
- Website
- shopingathome.com
- My Satellite Setup
-
Technomate TM-5402HD M3 C1+ Super+
Primesat VBox
2 x Actuators
Precision 1.3m Prime Focus Dish & mount.
InvertoTwin Black Pro C120
Amiko Viper4K
Primesat VBox
2 Actuators
Precision 1.5m Prime Focus Dish & mount
Titanium C1W-PLL C Band
Seven Computers : )
Two Davis Vantage Pro Weather stations
One Waldbeck Weather Station
- My Location
- Mullion Cove Cornwall
C-band LNBF C1W-PLL Wideband 65dB Gain- Phase Lock Loop 3.4-4.2GHz Satellite LNB
Single output. £12 plus postage £6.57
I replaced it as I though it may have lost gain, but on fitting a replacement there was no difference : )
A little bubbling on the external paint and surface corrosion inside.
I had in the past experimented with a motor drive to turn the circular converting slab, to do this I removed the runners inside.
The motor is low volts.
It did work but I decided it was not required, so I used some plastic Araldited to the sides to replace the runners.
I also did not use the Scalar rings and fitted a T Piece as photo, this worked very well, probably beter.
If you wish I will supply you with a piece of Acrylic large enough for you to make one : )
This will all depend on how it is with your dish.
I will remove all the modifications if you wish they used existing holes.
God Bless Spiff
Single output. £12 plus postage £6.57
I replaced it as I though it may have lost gain, but on fitting a replacement there was no difference : )
A little bubbling on the external paint and surface corrosion inside.
I had in the past experimented with a motor drive to turn the circular converting slab, to do this I removed the runners inside.
The motor is low volts.
It did work but I decided it was not required, so I used some plastic Araldited to the sides to replace the runners.
I also did not use the Scalar rings and fitted a T Piece as photo, this worked very well, probably beter.
If you wish I will supply you with a piece of Acrylic large enough for you to make one : )
This will all depend on how it is with your dish.
I will remove all the modifications if you wish they used existing holes.
God Bless Spiff
Attachments
-
IMGA0852.JPG186.1 KB · Views: 27
-
IMGA0853.JPG258.4 KB · Views: 16
-
IMGA0854.JPG164.6 KB · Views: 15
-
IMGA0855.JPG117.9 KB · Views: 15
-
IMGA0856.JPG205.1 KB · Views: 14
-
IMGA0860.JPG192.3 KB · Views: 15
-
IMGA0858.JPG173.3 KB · Views: 15
-
IMGA0857.JPG186.6 KB · Views: 15
-
IMGA0861.JPG176.1 KB · Views: 17
-
IMGA0866.JPG178.9 KB · Views: 26
Last edited: