Getting a new clone
- Thread starter mat989
- Start date
Max2000
satellite lover
- Joined
- Jun 21, 2005
- Messages
- 35
- Reaction score
- 0
- Points
- 6
- My Satellite Setup
- DM 8000 + SkyUk full + Toroidal dish with 12 lnbs ( 31.5E, 28.2E, 23.5E, 19.2E, 16E, 13E, 10E, 7E, 4.8E, 0.8W, 4W, 12.5W) + Gibertini 1.25m with smr1224 AZ/EL invacom lnbf + 8ft dish with jaeger 36" actuator and C-band esx242 lnbf (58W - 78.5E)
- My Location
- London
Hi,
There are no clones of dm500hd and dm 8000 yet, but only dm800's.
If you buy a clone, beware of warranty, because an original one can be shipped to Dream-Multimedia to be repaired,
while a clone can't.
So look for a seller of trust, where to buy it, who'll give assistance to to you if you have any problem.
Max
There are no clones of dm500hd and dm 8000 yet, but only dm800's.
If you buy a clone, beware of warranty, because an original one can be shipped to Dream-Multimedia to be repaired,
while a clone can't.
So look for a seller of trust, where to buy it, who'll give assistance to to you if you have any problem.
Max
Max2000
satellite lover
- Joined
- Jun 21, 2005
- Messages
- 35
- Reaction score
- 0
- Points
- 6
- My Satellite Setup
- DM 8000 + SkyUk full + Toroidal dish with 12 lnbs ( 31.5E, 28.2E, 23.5E, 19.2E, 16E, 13E, 10E, 7E, 4.8E, 0.8W, 4W, 12.5W) + Gibertini 1.25m with smr1224 AZ/EL invacom lnbf + 8ft dish with jaeger 36" actuator and C-band esx242 lnbf (58W - 78.5E)
- My Location
- London
The biggest difference between original and clone is about the upgrade.
My original dm800 could be upgraded how many times I like a day without any problem.
A clone needs a lot of time to be upgraded and often that's not possible with every image.
Then, I prefer a dm800 to a 500hd.
The 500's cheaper, but it has no usb port for Smargo or Omnikey readers and hardisk can't be put inside, but only as external
e-sata.
Max
My original dm800 could be upgraded how many times I like a day without any problem.
A clone needs a lot of time to be upgraded and often that's not possible with every image.
Then, I prefer a dm800 to a 500hd.
The 500's cheaper, but it has no usb port for Smargo or Omnikey readers and hardisk can't be put inside, but only as external
e-sata.
Max
mat989
Member
- Joined
- Apr 24, 2010
- Messages
- 4
- Reaction score
- 0
- Points
- 1
- Age
- 54
- My Satellite Setup
-
DM500S
26E, 7W, and 13E
- My Location
- SA
Thnx. I did read somewhere that internal HDD leads to overheat, so perhaps my best choice is to utilize the esata port...
Can I jtag a DM800HD clone in case of a bad/corrupt flash? or in case DMM distributed a virus killing clones
Can I jtag a DM800HD clone in case of a bad/corrupt flash? or in case DMM distributed a virus killing clones
Max2000
satellite lover
- Joined
- Jun 21, 2005
- Messages
- 35
- Reaction score
- 0
- Points
- 6
- My Satellite Setup
- DM 8000 + SkyUk full + Toroidal dish with 12 lnbs ( 31.5E, 28.2E, 23.5E, 19.2E, 16E, 13E, 10E, 7E, 4.8E, 0.8W, 4W, 12.5W) + Gibertini 1.25m with smr1224 AZ/EL invacom lnbf + 8ft dish with jaeger 36" actuator and C-band esx242 lnbf (58W - 78.5E)
- My Location
- London
Dm800 overheats very much without inside hardisk too; but I've ever had no problem with it.
There are no images who corrupt dm800 clone's flash; it only was for the old dm500's ones.
Simply, you could have problem with it if anything goes broken inside and there is no factory that could repair it.
Max
There are no images who corrupt dm800 clone's flash; it only was for the old dm500's ones.
Simply, you could have problem with it if anything goes broken inside and there is no factory that could repair it.
Max