Programming MM
How to do:
1. put the module in SetTopBox (ST
STB-CI-Menue: DreamLoad (ready for upload) or:
select "Prepare for loading" and press OK
"YES - Activate loader" and press OK
(now: the old file in the module is deleted)
remove and re-insert the module
Now the module is in upload-mode
2. insert programmer into the module
(green LED = power), connect RS232-cable to PC
comport 1 or 2
3. start loader-programm
select comport in menu "Settings"
press connect
4. load file *.mbf by clicking "Program module ..."
select file>upload begin
5. remove and re-insert the module