Problems with 13E Hotbird

[I.LuV.ManUTd!]

Hey,

I've got an 80cm dish and I've having a few issues with Hotbird. Basically when I'm on Hotbird 8 for example and move to Hotbird 9 (simply changing the channel) a lot of the times my dreambox will say service can not be found. If I swing round to 28.2E and then to Hotbird 9 - it most likely will work.

On Hotbird 8 I'm not 'locking' for some reason, my signal on Hotbird 9 is 90%+, whereas on Hotbird 8 on all frequencies it won't go above 70% and lock.

Then I try channels on Hotbird 8 and most work fine, except the ones I want to check.

It's a bit of a mess and hard to explain, any tips/ideas?

 

[shamonee]

Check transponder frequency if fine may be a slight alignment issue although 70% is fine so I would think it would be incorrect frequencies
Check on lyngsat

 

[I.LuV.ManUTd!]

Check transponder frequency if fine may be a slight alignment issue although 70% is fine so I would think it would be incorrect frequencies
Check on lyngsat

Hey, I have checked the transponder frequency and it is correct.

 

[RichardinSpain]

I need at least 77% on my 500s to get a lock/picture

 

[I.LuV.ManUTd!]

I have done a wipe of all old channels and scanned again, still doing it!

 

[Chris76]

Just a thought mate input a new xml file and renew your settings via db-edit


Sent from iPhone using Taptalk.

 

[I.LuV.ManUTd!]

Just a thought mate input a new xml file and renew your settings via db-edit


Sent from iPhone using Taptalk.

I'll try that later today.

 

[anees]

Hey, I have checked the transponder frequency and it is correct.

please check ur LNB Position please ,and move slowely may be work better.

Regards