conk
Member
- Joined
- Apr 25, 2006
- Messages
- 5
- Reaction score
- 0
- Points
- 0
- Age
- 77
- Website
- www.skyhigh-uk.co.uk
- My Satellite Setup
-
Echostar AD3600IP Via
90cm parabolic dish with DiseqC 1.2 positioner
Pentium 4 2.0Ghz PC
- My Location
- Lincolnshire
Hi,
I came back to the Satellite scene after an absence of some 3 years. I use an echostar AD3600IP via with a DiseqC 1.2 positioner, which I still have not worked out how to work with the echostar and a 90 cm parabolic dish. I get 80% signal and quality on Hotbird and some 60% on 1 degree West. So I left the dish on Hotbird and it was working fine on the French channels and others with the Magic Module Pentacrypt 1.09 and a 6in1 Magic card. Until two nights ago (Sunday) when it all closed down. I thought that the codes had changed and that was no problem, but checking the module I now see that it is not showing Penta 1.09 but DREAMLOAD and that I cannot understand. I did not reprogramme the module so how did this happen?? Can anyone help? can I reprogramme the module and how? I do have a MASTERA II card programmer but not a module one.
Help please
Con
I came back to the Satellite scene after an absence of some 3 years. I use an echostar AD3600IP via with a DiseqC 1.2 positioner, which I still have not worked out how to work with the echostar and a 90 cm parabolic dish. I get 80% signal and quality on Hotbird and some 60% on 1 degree West. So I left the dish on Hotbird and it was working fine on the French channels and others with the Magic Module Pentacrypt 1.09 and a 6in1 Magic card. Until two nights ago (Sunday) when it all closed down. I thought that the codes had changed and that was no problem, but checking the module I now see that it is not showing Penta 1.09 but DREAMLOAD and that I cannot understand. I did not reprogramme the module so how did this happen?? Can anyone help? can I reprogramme the module and how? I do have a MASTERA II card programmer but not a module one.
Help please
Con