Testing New White Sky UK Card - CAID 963

V8 Dave

Member
Joined
Sep 10, 2006
Messages
16
Reaction score
0
Points
1
Age
43
My Satellite Setup
DM500S with Zone 2 on Moteck 2100
My Location
Portsmouth
It should work wtih Omnikey under Newcs, Omnikey is not supported by CCcam.
 

V8 Dave

Member
Joined
Sep 10, 2006
Messages
16
Reaction score
0
Points
1
Age
43
My Satellite Setup
DM500S with Zone 2 on Moteck 2100
My Location
Portsmouth
It should work wtih Omnikey under Newcs, Omnikey is not supported by CCcam.
 

B16MCC

Dreambox Gimp & Coder
Joined
Nov 16, 2005
Messages
1,562
Reaction score
8
Points
0
Age
51
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
My Location
/var/tuxbox/config
As metioned many times in this thread , CCcam doesn't 'Not Work' with an omnikey, it simply doesn't support the use of it. All omnikey readers use the PCSC protocol, CCcam does not !
 

B16MCC

Dreambox Gimp & Coder
Joined
Nov 16, 2005
Messages
1,562
Reaction score
8
Points
0
Age
51
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
My Location
/var/tuxbox/config
As metioned many times in this thread , CCcam doesn't 'Not Work' with an omnikey, it simply doesn't support the use of it. All omnikey readers use the PCSC protocol, CCcam does not !
 

ralphmagno

Regular Member
Joined
Jan 12, 2005
Messages
994
Reaction score
17
Points
18
Age
74
My Location
naples italy
hello to all.
i wanted to find out some information.
are you able to use a sky uk card on a non sky box somehow?
if the power goes out will this box reset it self last channel it was on?
if for example if i set this up on the itv frequency that is not on astra 2 d
on 11.402 v itv package, and the power goes out this box will come on to the last signal it was on or will this go to stand by.
last how offen do you have to upgrade the softwhere????

thanks
ralph:)
 

ralphmagno

Regular Member
Joined
Jan 12, 2005
Messages
994
Reaction score
17
Points
18
Age
74
My Location
naples italy
hello to all.
i wanted to find out some information.
are you able to use a sky uk card on a non sky box somehow?
if the power goes out will this box reset it self last channel it was on?
if for example if i set this up on the itv frequency that is not on astra 2 d
on 11.402 v itv package, and the power goes out this box will come on to the last signal it was on or will this go to stand by.
last how offen do you have to upgrade the softwhere????

thanks
ralph:)
 

B16MCC

Dreambox Gimp & Coder
Joined
Nov 16, 2005
Messages
1,562
Reaction score
8
Points
0
Age
51
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
My Location
/var/tuxbox/config
You can now use sly UK new white card caid 0963 directly in the Dreambox using CCcam 2.1.3. It is safe to use the internal card reader and the card updates properly. There is however, no way of knowing what changes may lie ahead.
A dreambox will return to its last channel upon reboot, and will reboot after a power failure.
You should never need to update the software unless sly make changes to the new card system.
 

B16MCC

Dreambox Gimp & Coder
Joined
Nov 16, 2005
Messages
1,562
Reaction score
8
Points
0
Age
51
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR & DM 800 HD ---
Motek SG2100 & Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full & 24" Apple iMAC ----
My Location
/var/tuxbox/config
You can now use sly UK new white card caid 0963 directly in the Dreambox using CCcam 2.1.3. It is safe to use the internal card reader and the card updates properly. There is however, no way of knowing what changes may lie ahead.
A dreambox will return to its last channel upon reboot, and will reboot after a power failure.
You should never need to update the software unless sly make changes to the new card system.
 

zoro25

Attack of the Clones
Joined
Dec 23, 2005
Messages
169
Reaction score
3
Points
16
Age
50
Website
www.thetestmanager.com
My Satellite Setup
Dreambox 800 - Nabilosat Image and 250gig Hard-drive (pointing at 28.2E)
Dreambox 7020 with 120 gig hard-drive disk - running a motorised dish
DM600 +DM500
although only usually the 800 and 7020 are both on.
My Location
UK
Too many questions and not in the correct thread either.

With over 200 posts I'm sure you know the way the forum works with regards to "self help"
virtually all your questions are answered in the forum and can be found using search.
 

zoro25

Attack of the Clones
Joined
Dec 23, 2005
Messages
169
Reaction score
3
Points
16
Age
50
Website
www.thetestmanager.com
My Satellite Setup
Dreambox 800 - Nabilosat Image and 250gig Hard-drive (pointing at 28.2E)
Dreambox 7020 with 120 gig hard-drive disk - running a motorised dish
DM600 +DM500
although only usually the 800 and 7020 are both on.
My Location
UK
Too many questions and not in the correct thread either.

With over 200 posts I'm sure you know the way the forum works with regards to "self help"
virtually all your questions are answered in the forum and can be found using search.
 

betty1234

Member
Joined
Nov 23, 2008
Messages
29
Reaction score
0
Points
0
Age
58
My Satellite Setup
dream box dm800 sky 2x lnb
My Location
glasgow
betty1234 said thank to tomthebomb 1968 ,for fixing all my probs with my dm800a real cool guy
 

betty1234

Member
Joined
Nov 23, 2008
Messages
29
Reaction score
0
Points
0
Age
58
My Satellite Setup
dream box dm800 sky 2x lnb
My Location
glasgow
betty1234 said thank to tomthebomb 1968 ,for fixing all my probs with my dm800a real cool guy
 

chrisfound

Member
Joined
Aug 24, 2005
Messages
48
Reaction score
0
Points
0
Age
69
My Satellite Setup
Dream 7000 + 7025
Sky+ box, On-Dig,
3 laptops, 1 desktop, Win XP and soon '7', OSX on one laptop
My Location
London UK
Hi
First I will let you know that the ccamd is working on my 7000 after a little work trying to get mgcamd to work but failed, my 7025 has failed again so its going to Germany for repair.

In the interim I need some advice on cccamd cfg placement and your creator program.

1. I could not find the ccamd.cfg file after install, so copied over one from another and modified it with my box number but cannot get sly to open on films + sport, I think it is in the wrong place so can you tell me the correct place to put it.

2.Your config creator program does not talk to my dream 7000 possibly from an error in the lan setup or as we discussed earlier the program was designed for later models
However, I need to know if this write over or replace the existing / original cfg file that is there, can you tell me where does the program look for the file

I await your reply, I have looked in the pages ref; the sly card.
 

chrisfound

Member
Joined
Aug 24, 2005
Messages
48
Reaction score
0
Points
0
Age
69
My Satellite Setup
Dream 7000 + 7025
Sky+ box, On-Dig,
3 laptops, 1 desktop, Win XP and soon '7', OSX on one laptop
My Location
London UK
Hi
First I will let you know that the ccamd is working on my 7000 after a little work trying to get mgcamd to work but failed, my 7025 has failed again so its going to Germany for repair.

In the interim I need some advice on cccamd cfg placement and your creator program.

1. I could not find the ccamd.cfg file after install, so copied over one from another and modified it with my box number but cannot get sly to open on films + sport, I think it is in the wrong place so can you tell me the correct place to put it.

2.Your config creator program does not talk to my dream 7000 possibly from an error in the lan setup or as we discussed earlier the program was designed for later models
However, I need to know if this write over or replace the existing / original cfg file that is there, can you tell me where does the program look for the file

I await your reply, I have looked in the pages ref; the sly card.
 

sep990

Member
Joined
Jul 20, 2008
Messages
67
Reaction score
14
Points
8
Age
50
My Satellite Setup
DM600
My Location
UK
Hi have been reading various threads regarding the white card for a while.

Got my card on Friday, have loaded the latest version of cccam and newcs on my DM600 (Pli Jade Green image).

The sharing is working fine, but for some reason I can not open my local one, it is using a share.

Also on the newcs config do we still have to setup the au as off and the ones below as

<blocksa>yes</blocksa>
<blockua>yes</blockua>
<blockga>yes</blockga>
<blockc0>yes</blockc0>
I can connect to the newcs web interface and my entitlements have updated as I had put the card in the sly box first.

Thank you for the help and thank you B16MCC for the config creator.
 

sep990

Member
Joined
Jul 20, 2008
Messages
67
Reaction score
14
Points
8
Age
50
My Satellite Setup
DM600
My Location
UK
Hi have been reading various threads regarding the white card for a while.

Got my card on Friday, have loaded the latest version of cccam and newcs on my DM600 (Pli Jade Green image).

The sharing is working fine, but for some reason I can not open my local one, it is using a share.

Also on the newcs config do we still have to setup the au as off and the ones below as

<blocksa>yes</blocksa>
<blockua>yes</blockua>
<blockga>yes</blockga>
<blockc0>yes</blockc0>
I can connect to the newcs web interface and my entitlements have updated as I had put the card in the sly box first.

Thank you for the help and thank you B16MCC for the config creator.
 

B16MCC

Dreambox Gimp & Coder
Joined
Nov 16, 2005
Messages
1,562
Reaction score
8
Points
0
Age
51
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR &amp; DM 800 HD ---
Motek SG2100 &amp; Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full &amp; 24&quot; Apple iMAC ----
My Location
/var/tuxbox/config
sep990, just use CCcam 2.1.3 by itself. You don't need NewCS any more.

chrisfound, CCcams config file is called CCcam.cfg it is located in /var/etc in enigma 1 boxes and in /etc on Enigma 2 boxes.
Dreambox Config Creator will connect to any FTP server that you specify. If it does not connect it has nothing to do with the Dreambox model.
Does it show an error at all ?
Are you using the latest version 0.9.0 ?
If so, you can see what the config file looks like in the output window before you actually create the file, so you'll know what your boxkey line should look like.
 

B16MCC

Dreambox Gimp & Coder
Joined
Nov 16, 2005
Messages
1,562
Reaction score
8
Points
0
Age
51
My Satellite Setup
2 Dreamboxes..........
---------------------------------------------
--- DM 8000 HD PVR &amp; DM 800 HD ---
Motek SG2100 &amp; Triax 80cm Dual LNB
------ Fixed Dish 28e Quad LNB -------
---- Sly HD Full &amp; 24&quot; Apple iMAC ----
My Location
/var/tuxbox/config
sep990, just use CCcam 2.1.3 by itself. You don't need NewCS any more.

chrisfound, CCcams config file is called CCcam.cfg it is located in /var/etc in enigma 1 boxes and in /etc on Enigma 2 boxes.
Dreambox Config Creator will connect to any FTP server that you specify. If it does not connect it has nothing to do with the Dreambox model.
Does it show an error at all ?
Are you using the latest version 0.9.0 ?
If so, you can see what the config file looks like in the output window before you actually create the file, so you'll know what your boxkey line should look like.
 

sep990

Member
Joined
Jul 20, 2008
Messages
67
Reaction score
14
Points
8
Age
50
My Satellite Setup
DM600
My Location
UK
Just removed newcs from the card server but still using a share to open a local channel. Any other suggestions?

Thank you

Just rebooted the box and it seem okay for now.

Thank you for your help and config app.
 

sep990

Member
Joined
Jul 20, 2008
Messages
67
Reaction score
14
Points
8
Age
50
My Satellite Setup
DM600
My Location
UK
Just removed newcs from the card server but still using a share to open a local channel. Any other suggestions?

Thank you

Just rebooted the box and it seem okay for now.

Thank you for your help and config app.
 
Top