subman
Member
- Joined
- Feb 20, 2006
- Messages
- 301
- Reaction score
- 33
- Points
- 28
- Age
- 72
- My Satellite Setup
- echostar 3600
- My Location
- essex
From reading all of the above its clear i did the right thing in not buying a ASC1 as its clear i dont think it would work moving a large dish with my
36 inch Thomson Saginaw Actuator with Hall Effect Sensor . So looks like its back to the original plan use the Echostar AD-3000IP to move the dish and skew motor or the only other way is via a Single or Dual axis dish controller by research concepts . From looking at the rear of the RC1500 it looks straight forward . But looking at the spec of ADC1 I dont think its got the grunt to move a large commercial solid dish .
36 inch Thomson Saginaw Actuator with Hall Effect Sensor . So looks like its back to the original plan use the Echostar AD-3000IP to move the dish and skew motor or the only other way is via a Single or Dual axis dish controller by research concepts . From looking at the rear of the RC1500 it looks straight forward . But looking at the spec of ADC1 I dont think its got the grunt to move a large commercial solid dish .