trying to do it... but struggling.The folder appears as a "media player" folder. When I unzipped it, the "media player" system of my Windows 8 unzipped it. Have I done anything wrong?I really do suggest you fully upgrade your M4 before you go any further. Then you can fully exploit any of the features that were introduced at a later date.
Are you on a marginal footprint for 28.2e. There has been a lot of changes over the last number of weeks. That why I scan 28.2e regularly. Which Italian streams are you referring to.
Make a list of what is missing and I will supply you with a list of settings. That’s why it’s important that you upgrade to the latest firmware.The 5w italian streams!
I get some of them ,strong signal. But the transponder list has mistakes and it seems i can' t put in all transponders. Equally for the French ones, I get 15 odd channels & about 10 are missing despite my introducing the missing transponders,using Kingofsat
You need to download the zip file, extract it first and put the .bin file in the root of your USB stick. Once that’s done plug it into your M4 USB port and select the .bin file and the update will start.trying to do it... but struggling.The folder appears as a "media player" folder. When I unzipped it, the "media player" system of my Windows 8 unzipped it. Have I done anything wrong?
Here’s a list of How To questions answered from the TM website support section. Technomate Support - TM-5402 M4Make a list of what is missing and I will supply you with a list of settings. That’s why it’s important that you upgrade to the latest firmware.
When I plug the USB in,the receiver just says "USB in".What am I supposed to do next? there s no "list" or whatever....You need to download the zip file, extract it first and put the .bin file in the root of your USB stick. Once that’s done plug it into your M4 USB port and select the .bin file and the update will start.
You’re welcome."You need to download the zip file, extract it first and put the .bin file in the root of your USB stick. Once that’s done plug it into your M4 USB port and select the .bin file and the update will start." I have done this. It uploaded nicely! There are 2 additional files called "write". What should I do with them?
A great thank you to Satspot,your help is precious. Have a good night!
Was there a reason why you reset it.All my respects to QE2 . RIP
I understand the BBC will be in mourning mode for a while.
Good morning!
I uploaded the update yesterday late;after it was over I turned off the receiver,went tobed
Turned it on this morning,as I thought I d do the reset.
And it set itself on "boot" 20 minutes ago. Still booting now. Shall I wait?
If the M4 is still reporting boot I’d switch it off and remove the power for a few minutes and reconnect the power and switch back on again. Let me know what happens.All my respects to QE2 . RIP
I understand the BBC will be in mourning mode for a while.
Good morning!
I uploaded the update yesterday late;after it was over I turned off the receiver,went tobed
Turned it on this morning,as I thought I d do the reset.
And it set itself on "boot" 20 minutes ago. Still booting now. Shall I wait?
I just did that and itwoke up fine!If the M4 is still reporting boot I’d switch it off and remove the power for a few minutes and reconnect the power and switch back on again. Let me know what happens.
Bingo!!! worked... do I need to keep the receiver connected to sat?I just did that and itwoke up fine!
I am now learning to tame the "streams"... I first got a list of 40-odd italians plus 12-odd french all clear,only toencrypt a few minute later during zapping. I am now scannig using the advanced with Streams on...
and strangely enough the HD bbc channels are back!
The only thing you need to keep connected to the M4 is the internet to keep the 7 day EPG operational. As I said as soon as you upgrade to the latest firmware any additional features added after you purchased would become available.Bingo!!! worked... do I need to keep the receiver connected to sat?
I'm using another on the side. I think I ll get a monoblock twin very soon...
Have a good day!!
For backup, with a USB stick inserted press the USB key on your remote. Press the Yellow button on the remote called Upload to USB. Select Upload Channel List to USB and you have your settings stored on the USB stick if you ever loose them or do a Factory Reset again.Backup? do you mean saving my lists onto its memory?
My internet modem is 6 metres away,should I use a cable or can I rely on wifi? I have fibre
and I m using it on the tv(via ethernet cable) for the Arte replay,which works really well.
which kind of Wifi dongle should I buy? I would use the USB port ,I supposeFor backup, with a USB stick inserted press the USB key on your remote. Press the Yellow button on the remote called Upload to USB. Select Upload Channel List to USB and you have your settings stored on the USB stick if you ever loose them or do a Factory Reset again.
If a WiFi dongle works on your M4 no need to drag a LAN cable over to connect up. Try YouTube on the M4 and see what quality connection you have on WiFi.
Something like that USB WiFi Dongle for Technomate Receivers - Next Day DeliveryOnce my back up is finished,will it be wiser to leave the receiver under tension (it displays time) or may i switch it off(as most people do now to save electricity)? Is there an advantage leaving it under tension?
