satscaner
We Are The Supreme Beings
- Joined
- Oct 30, 2005
- Messages
- 74
- Reaction score
- 0
- Points
- 0
- Age
- 45
- My Satellite Setup
-
1.2M prime focus with SA58 H-H
receiver-New Wave 9000 BP MK II
- My Location
- hampshire
Is it possible to upgrade a Mrv using a funcard 4 ?
And
Where can I find the flash hex to be used with a funcard 4 ?
I've made the ext eeprom hex's using bin/udp files and a splitter but i need a flash hex that works.
when I write to the funcard with a flash hex and the ext hex I've made, I then placed the card in the mrv and try to upgrade the firmware but its says invalid card and will not upgrade.
am I doing this the right way or am I not doing somthing that I should be?
this is my Mrv info
H/W 1.5
S/W Mrv 2.23
Loader 1
Any ideas people???
And
Where can I find the flash hex to be used with a funcard 4 ?
I've made the ext eeprom hex's using bin/udp files and a splitter but i need a flash hex that works.
when I write to the funcard with a flash hex and the ext hex I've made, I then placed the card in the mrv and try to upgrade the firmware but its says invalid card and will not upgrade.
am I doing this the right way or am I not doing somthing that I should be?
this is my Mrv info
H/W 1.5
S/W Mrv 2.23
Loader 1
Any ideas people???