Global PSA120 "Active Splitter".
Se lo que tienes y se como funcionan los comandos DiSeqC.
Es un splitter de 1x2 con un previo de linea incorporado con una ganacia de 13dB.
Soy enemigo de los previos de linea, normalmente su figura de ruido es muy alta y queremos limpieza en la señal.
Los previos de linea si dejan pasar todo al motor/LNB (ordenes DiSEqC 1.3==> Usal y Tono para que el LNB cambie de banda baja/alta).
Nunca use lo que tienes, pon un repartidor normal, perderas 4dB de señal, no es problema para estas pruebas de funcionamiento y sales de dudas.
Para que funcione este repartidor/splitter activo y el 2LNB (LNB twin), el receptor tiene que usar tambien el segundo sintonizador (B.) en otro tp del satelite.
El LNB dobel/twin necisita ser alimentado por cada linea, recuerda que son 2 LNB's dentro de una misma caja
Para verificar el conexionado y funcionamiento de la segunda linea, es muy sencillo.
Como indico, Usa el PIP del VU+Solo2 para verificar su funcionamiento, por ejemplo, si apuntas al AStra a 19'2ºEste, puedes poner TV GALICIA (TVGA) y Canal Sur A. (Andalucia), indicados como referencia para la prueba.
No me gustan los canales, pero para hacer las pruebas, son muy comodos y tienen buen nivel en toda Europa.
Si usando el PIP la segunda pantalla esta negra, ya sabes la causa, algo no esta bien conectado.
Al activar, seguramente tendras lo mismo en las 2 pantalla, cambias de canal y pones otro que use otro TP y veras que ahora el receptor usa los 2 tuner.
Si le das a PIP, luego azul y despues al verde (mover), si pulsas la tecla 0, cambia la forma de la pantalla, una opcion es poner las 2 pantalla a tamño real (50%), muy util para controlar.
-----------
Global PSA120 "Active Splitter".
I know what you have and I know how DiSeqC commands work
It is a 1x2 splitter with a built-in preamp with a gain of 13dB.
I am enemy of the previous ones of line, normally its figure of noise is very high and we want cleaning in the signal.
The previous line if you pass all to the engine/LNB (orders DiSEqC 1.3 ==> Usal and Tone for the LNB to change low/high band).
Never use what you have, put a normal splitter, you will lose 4dB of signal, it is not problem for these tests of operation and you leave doubts.
For this active splitter / splitter and 2LNB (LNB twin) to work, the receiver must also use the second tuner (B.) on another satellite tp.
The LNB dobel / twin needs to be fed by each line, remember that there are 2 LNB's within the same box
To verify the connection and operation of the second line, it is very simple.
As indicated, Use the PIP of the VU + Solo2 to verify its operation, for example, if you point to the AStra at 19.2ºEste, you can put TV GALICIA (TVGA) and Canal Sur A. (Andalucia), indicated as reference for the test.
I do not like the channels, but to do the tests, they are very comfortable and have a good level throughout Europe.
If using the PIP the second screen is black, you know the cause, something is not well connected.
When activating, you will surely have the same on the 2 screen, change channels and put another that uses another TP and you will see that now the receiver uses the 2 tuner.
If you give PIP, then blue and then green (move), if you press the 0 key, change the shape of the screen, an option is to put the 2 screen to real size (50%), very useful to control.
El bloqueador dc va en la linea/boca del medidor/analizador de espectro.
Los bloqueadores DC, es un condensador, que no deja pasar la alimentacion, pero si dejan pasar los tonos.
---------------
The dc blocker is on the meter line / mouth of the spectrum analyzer.
DC blockers, is a capacitor, which does not let the power pass, but if they let the tones go by.
En la TV lo veras igual,
Usando webif desde el PC, la imagen del Canal Sur A. sale negro, añadida a mano, por no hacer una foto de la TV.
-----------
On TV you'll see it alike,
Using webif from the PC, the image of the Channel South A. leaves black, added by hand, by not making a photo of the TV.
El VU+Solo2 y el VU+DUO2 tienen las mismas opciones/procesador y configuracion, para lo que quieres, son iguales 100%
------------------
The VU + Solo2 and the VU + DUO2 have the same options / processor and configuration, for what you want, they are the same 100%