Reply to thread

Message: <blockquote data-quote="John" data-source="post: 979859" data-attributes="member: 175005">... barrel joint silicone sealed up and plastic cover re-fitted..... bit of a untidy attempt but i was getting fed up.    My top cover has a joint half way down but this is not required to be done.As can be seen, no blocking by the lnbf at all and it does seem to be performing well with initial tests.Ignore the queer looking angles between the bottom dish arm and the lnb position..... it's just a skew thing due to the temporary set-up.  Once the installation is installed correctly the lnb cables will be dropping down parallel to the bottom arm.</blockquote>