Reply to thread

Message

<blockquote data-quote="golpesar" data-source="post: 476727" data-attributes="member: 277333">After some attempts, Finally found it. I write down the steps to help the others having the same problem:0. Assume that your Image name is ABCDEF.img you must use &quot;ABCD&quot; in the following steps if needed1. Install a serial_all image like SifTeam1.8.5.1 or NabiloFinal2V08 to Flash. Your Image must be ENIGMA BASE2. Set up all options and IPs in order to continue3. Install Flash Imaghe with &quot;Flash Wizard Pro 6.3&quot;, so you will have the chance of selecting an image when booting4. Copy The File &quot;bootmenue.conf&quot; from this directory to /var/tuxbox/config/enigma/bootmenue.conf 5. Change its attibute to 6446. Open the web browser and type IPBox IP in the web browser7. Select WEBINTERFACE ----&gt; CONFIG ----&gt; BOOT MANAGER ----&gt; BOOT MENU make choice &quot;bootmanager&quot; you must set it up to &quot;flashwizard&quot; later but int step 10 and not at this time8. Copy ABCD.img to HDD 9. From WEBINTERFACE Home Page CONFIG ----&gt; BOOT MANAGER ----&gt; ADD10.Again go to WEBINTERFACE ----&gt; CONFIG ----&gt; BOOT MANAGER ----&gt; BOOT MENU make choice &quot;flashwizard&quot;11.Edit imagename with a Text editor and set its name to ABCD12.Now Copy the file &quot;go&quot; and &quot;imagename&quot; to /hdd/fwpro/ABCD/.. 13.Change the attribute of &quot;go&quot; and &quot;imagename&quot; to 77714.When you reload the box on display you will see FlashWizard and can select your new image 15.All Img in multiboot can be found on /hdd/fwproNote:The following options must be present in youe bootmenue.conf:bs=1024 skip=1152 count=4992 box=7Note That :number 7 for DM7000, number 5 for DM500 imageRequired Files:_http://rapidshare.com/files/81371811/RequiredFiles.zip_</blockquote>

[QUOTE="golpesar, post: 476727, member: 277333"] After some attempts, Finally found it. I write down the steps to help the others having the same problem: 0. Assume that your Image name is ABCDEF.img you must use "ABCD" in the following steps if needed 1. Install a serial_all image like SifTeam1.8.5.1 or NabiloFinal2V08 to Flash. Your Image must be ENIGMA BASE 2. Set up all options and IPs in order to continue 3. Install Flash Imaghe with "Flash Wizard Pro 6.3", so you will have the chance of selecting an image when booting 4. Copy The File "bootmenue.conf" from this directory to /var/tuxbox/config/enigma/bootmenue.conf 5. Change its attibute to 644 6. Open the web browser and type IPBox IP in the web browser 7. Select WEBINTERFACE ----> CONFIG ----> BOOT MANAGER ----> BOOT MENU make choice "bootmanager" you must set it up to "flashwizard" later but int step 10 and not at this time 8. Copy ABCD.img to HDD 9. From WEBINTERFACE Home Page CONFIG ----> BOOT MANAGER ----> ADD 10.Again go to WEBINTERFACE ----> CONFIG ----> BOOT MANAGER ----> BOOT MENU make choice "flashwizard" 11.Edit imagename with a Text editor and set its name to ABCD 12.Now Copy the file "go" and "imagename" to /hdd/fwpro/ABCD/.. 13.Change the attribute of "go" and "imagename" to 777 14.When you reload the box on display you will see FlashWizard and can select your new image 15.All Img in multiboot can be found on /hdd/fwpro Note: The following options must be present in youe bootmenue.conf: bs=1024 skip=1152 count=4992 box=7 Note That :number 7 for DM7000, number 5 for DM500 image Required Files: _http://rapidshare.com/files/81371811/RequiredFiles.zip_ [/QUOTE]

Verification