:-sball don't know where my prev reply went but??
Ok this might help get you started..the 8776 is jtagable,via 'cn16'. pinout is " 1,3,5,7,9,11 are ground,
pin 2 is trst,pin 6 is tdo, pin 8 is tdi, pin 10 is tck, and pin 12 is tms. the boot select is a headder just behind
the screw at the center of the board . jumping an inner pin to the pin closest to r106 will boot from the dcu.
the pin at the other end of the headder is 'esel'. there is a master reset 'button' located rear of the system
cpu (sw6).
this ird is a 2 tsop unit so i'm guessing that it is similar to a 301-13. if you are using jkeys you may have to use the
version for the 301 .
in either case, you would have to edit 'jkeys.def ' file to specify 39vf160 (check this) flash chips,and 24c64 eeprom.
I havn't tried new bins yet so don't know what works. this ird may be more like a 2700,4900,drd420
my unit is cofigured for 'jedi'tvb ( asian) but does have some 'fta' features. don't know if the aussi system
has any fta features.
i will see if i can add some pix to help(abs8776.zip)
hope this is useful to you (or anyone) boxnut
