Reply to thread

Message

<blockquote data-quote="John" data-source="post: 1117884" data-attributes="member: 175005">.. Time for a bit of servicing and a change of lnb on the L/R/H/V C-band rig whilst the weather is decent.The home brew rotating polariser joint ball bearings needs a check &amp; re-greasing.There's not a lot of new stuff happening at the moment on the 4.5 - 4.8GHz section so the Norsat 8000RI Extended C- band<img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite24" alt="band 3" title="xBirthday Band&nbsp; &nbsp; band 3" loading="lazy" data-shortname="band 3" />&nbsp; 3.6 to 4.8GHz lnb is to be taken off and i'll fit a NJS 8486S 3.4GHz to 4.2GHz lnb and check out what's going on since i last looked around the 3.4GHz area for a change.A touch of adaptation to the flange coupling required due to the NJS having different fixing arrangement which has been done and ready to re-fit on the polariser asap.......................................................................................................................................................................................................................................................................................................................................................................[ATTACH=full]138411[/ATTACH][ATTACH=full]138412[/ATTACH]</blockquote>

[QUOTE="John, post: 1117884, member: 175005"] .. Time for a bit of servicing and a change of lnb on the L/R/H/V C-band rig whilst the weather is decent. The home brew rotating polariser joint ball bearings needs a check & re-greasing. There's not a lot of new stuff happening at the moment on the 4.5 - 4.8GHz section so the Norsat 8000RI Extended C- bandband 3 3.6 to 4.8GHz lnb is to be taken off and i'll fit a NJS 8486S 3.4GHz to 4.2GHz lnb and check out what's going on since i last looked around the 3.4GHz area for a change. A touch of adaptation to the flange coupling required due to the NJS having different fixing arrangement which has been done and ready to re-fit on the polariser asap. ...................................................................................................................................................................................................................................................................................................................................................................... [ATTACH type="full" alt="NJS 8486S flange mod..jpg"]138411[/ATTACH][ATTACH type="full" alt="Rotating joing re-grease.JPG"]138412[/ATTACH] [/QUOTE]

Verification