Reply to thread

Message

<blockquote data-quote="PaulR" data-source="post: 737550" data-attributes="member: 176256">I only have limited experience with multiswitches - not enough to offer a preferance.&nbsp; In any case, there may be a very limited number of suppliers of multiswitches with this number of inputs and ouputs.It really would be better if you could pull a third cable through.&nbsp; Is there not room for a extra single WF100? A splitter would not be a good idea.&nbsp; If you have to I would put a simple A/B manual switch, probably on the LNB2 input of the $ly+.&nbsp; If the additional receiver has an LNB out then you could loop through and then on to LNB2 of the $ly+ box.The HDR can work in non-Freesat mode and control a DiSeCQ switch but you must make sure that the bootloader is the latest U7.53 - this can be seen at the beginning of boot-up or in the menu configuration. Tivu has already used his HDR in this manner although I don't think he has used the CI slot yet.</blockquote>

[QUOTE="PaulR, post: 737550, member: 176256"] I only have limited experience with multiswitches - not enough to offer a preferance. In any case, there may be a very limited number of suppliers of multiswitches with this number of inputs and ouputs. It really would be better if you could pull a third cable through. Is there not room for a extra single WF100? A splitter would not be a good idea. If you have to I would put a simple A/B manual switch, probably on the LNB2 input of the $ly+. If the additional receiver has an LNB out then you could loop through and then on to LNB2 of the $ly+ box. The HDR can work in non-Freesat mode and control a DiSeCQ switch but you must make sure that the bootloader is the latest U7.53 - this can be seen at the beginning of boot-up or in the menu configuration. Tivu has already used his HDR in this manner although I don't think he has used the CI slot yet. [/QUOTE]

Verification