Reply to thread

Message

<blockquote data-quote="phoenix101" data-source="post: 725865" data-attributes="member: 362520">Hi Everyone, I would like some advice please. I am looking into put together my own&nbsp; linux based system for me to view HD satellite on. I would like to know&nbsp; which hardware I would need to allow me to receive a good signal and&nbsp; well as run CCcam and Newcamd. This system will soley be used for&nbsp; satellite so will not need other things. I want to be able to get the&nbsp; computer to record atleast two programs as any given type and I want to&nbsp; be able to loop the system to a 2nd if possible, althought I can do&nbsp; without this if needed. I was thinking about building a windows based&nbsp; system and then running ubuntu and clarkconnect and setting up the sytem&nbsp; up as a VM to run CCcam and the viewering software.The type of system I have so far is:<ul>
<li data-xf-list-type="ul">Linux OS</li>
<li data-xf-list-type="ul">2 (twin) tuners, and a loop (but i do not know which is the best to use)</li>
<li data-xf-list-type="ul">500Gb Hard drive</li>
<li data-xf-list-type="ul">1Gb Ram</li>
<li data-xf-list-type="ul">ethernet port</li>
<li data-xf-list-type="ul">HDMI connectivity</li>
<li data-xf-list-type="ul">2 X USB ports</li>
<li data-xf-list-type="ul">1 X Serial ports</li>
<li data-xf-list-type="ul">RCA ports</li>
</ul>What do people think?? Any advice would be much appricatedthank youphoenix</blockquote>

[QUOTE="phoenix101, post: 725865, member: 362520"] Hi Everyone, I would like some advice please. I am looking into put together my own linux based system for me to view HD satellite on. I would like to know which hardware I would need to allow me to receive a good signal and well as run CCcam and Newcamd. This system will soley be used for satellite so will not need other things. I want to be able to get the computer to record atleast two programs as any given type and I want to be able to loop the system to a 2nd if possible, althought I can do without this if needed. I was thinking about building a windows based system and then running ubuntu and clarkconnect and setting up the sytem up as a VM to run CCcam and the viewering software. The type of system I have so far is: [LIST] [*]Linux OS [*]2 (twin) tuners, and a loop (but i do not know which is the best to use) [*]500Gb Hard drive [*]1Gb Ram [*]ethernet port [*]HDMI connectivity [*]2 X USB ports [*]1 X Serial ports [*]RCA ports [/LIST] What do people think?? Any advice would be much appricated thank you phoenix [/QUOTE]

Verification