Reply to thread

Message: <blockquote data-quote="Vipersan" data-source="post: 982848" data-attributes="member: 325666">So ...turns out that either the lnb clamp diameter is a bit overlarge ...or the esx lnbs are a bit narrower than the clamps were intended for ...thus a bit sloppy and can't be gripped as tight as I'd like ..So ..cruised fleabay again ...and bought myself half a metre of shrink tubing ..2:1 shrinkage and 76mm diameter unshrunk ..I hope to be able to modify the outer diameter of the ESX lnbs though the wall thickness of the tube is not specified ...No matter ..if it is too thin I'll wrap a sleeve of 0.5mm thick plastic around the lnb outer first and shrink the tube over it ..rgdsVS</blockquote>