Reply to thread

Message

<blockquote data-quote="the colonel" data-source="post: 19225" data-attributes="member: 175874">Earlier this year this cam stopped working. After about a month working away from home I found the following problem.After about 2 minutes X-zone kept scrambling...If the receiver was switched off and on again the channel cleared but only for 2 minutes again. For some reason I could not inscramble XXL at all. The codes were good as they worked in a friends machine and I bought some new gold cards to try as well.I assumed the cam had just packed up. However reading some other posts I wonder if it might be a receiver problem? I have a Humax F!-VACL which is old software (H/W version SVC 1.00, S/W 1.02.02 and loader version L.2.03.) Last updated on 2nd April 1999! Perhaps an upgrade is in order.&nbsp; Having said that the Irdeto 2 cam works fine with official cards...Any ideas anybody?Thanks in advance,Colonel John Amery</blockquote>

[QUOTE="the colonel, post: 19225, member: 175874"] Earlier this year this cam stopped working. After about a month working away from home I found the following problem. After about 2 minutes X-zone kept scrambling...If the receiver was switched off and on again the channel cleared but only for 2 minutes again. For some reason I could not inscramble XXL at all. The codes were good as they worked in a friends machine and I bought some new gold cards to try as well. I assumed the cam had just packed up. However reading some other posts I wonder if it might be a receiver problem? I have a Humax F!-VACL which is old software (H/W version SVC 1.00, S/W 1.02.02 and loader version L.2.03.) Last updated on 2nd April 1999! Perhaps an upgrade is in order. Having said that the Irdeto 2 cam works fine with official cards... Any ideas anybody? Thanks in advance, Colonel John Amery [/QUOTE]

Verification