Reply to thread

Message: <blockquote data-quote="jeallen01" data-source="post: 1100475" data-attributes="member: 176704">I agree with Adam - 19E needs to be the centre LNB with the LNB 28E to one side of that and that for 13E to the other, Then:1 - swing the dish so that it points very slightly further East, and optimise that centre LNB for 19E in terms of dish elevation (it will be slightly lower than it currently is for 28E), and LNB skew .2 - slightly tilt the multi-LNB holder bar, so that, as you look past it to the dish face, the LNB on the Left (for 28E) is higher than the centre one and the one on the Right (for 13E) is lower than the centre one3 - optimise the position on the bar, and the skew of the 13E LNB, 4 - finally do the same for the 28E LNB.</blockquote>