Reply to thread

Message

<blockquote data-quote="siena_us" data-source="post: 16077" data-attributes="member: 175608">Hi all.&nbsp; I am in Siena Italy (up on top of one of the Chianti hills if that makes any difference) and yesterday we installed a 1.8 m Prime Focus dish.&nbsp; I had been using a 1.3m but was only able to get Astra 2D sometimes.&nbsp; We figured 1.8 would be fine but we are still having problems.&nbsp; The lnb that we used to have was a 0.5 and the one that came with the new dish is a 0.6 which could make some difference I presume.&nbsp; I have a panny 30 digibox.&nbsp; My signal strength is around 80-85% and the quality is 90%&nbsp; I guess my questions are:1)&nbsp; what should the lnb setup be (currently lo is 9.75 and hi 10.60)2) Default transponder is set to frequency 11.778 (V, 27500, 2/3), should I set it to something else?3)Any other helpful hints on how to get the picture more often (cuts out early morning and early evening, both for a couple of hours).Thanks for any ideas,Cristina</blockquote>

[QUOTE="siena_us, post: 16077, member: 175608"] Hi all. I am in Siena Italy (up on top of one of the Chianti hills if that makes any difference) and yesterday we installed a 1.8 m Prime Focus dish. I had been using a 1.3m but was only able to get Astra 2D sometimes. We figured 1.8 would be fine but we are still having problems. The lnb that we used to have was a 0.5 and the one that came with the new dish is a 0.6 which could make some difference I presume. I have a panny 30 digibox. My signal strength is around 80-85% and the quality is 90% I guess my questions are: 1) what should the lnb setup be (currently lo is 9.75 and hi 10.60) 2) Default transponder is set to frequency 11.778 (V, 27500, 2/3), should I set it to something else? 3)Any other helpful hints on how to get the picture more often (cuts out early morning and early evening, both for a couple of hours). Thanks for any ideas, Cristina [/QUOTE]

Verification