Reply to thread

Message: <blockquote data-quote="johnnym" data-source="post: 40694" data-attributes="member: 178979"><p>Brits In Mid-Norway (about 65N).  Have had the dish(1.2m) installed and the digibox works fine, get all channels on North beam but can't get any of the channels from 2D and most 2A South channels are 'bitty/off/on'.  This signal strength/quality is 100%/80% respectively and the 2D channels all display 'No satellite signal being received'.    The transponder page shows the default values of 11.778 and V.   Advice from the guy who sold me the dish was that they might appear with some fine tweaking, but the dish alignment/set-up guy says that 100/80 is spot on. Is this simply a case of too small a dish, or is there something that hasn't been done in the set-up of the box in order to receive signals from 2D?</p></blockquote><p></p>