Reply to thread

Message

<blockquote data-quote="Mickha" data-source="post: 810917" data-attributes="member: 187442">With mine I can currently get all the satellites, that I've tried, from 42E to 30W, but it still isn't tracking the arc 100% correctly. This could be because I had to drill 2 holes, to get the adapter plate to fit, and I might have pushed it too far forward, limiting the top adjusters ability to compensate sufficiently to allow perfect tracking.When I have time, I will take it down, and attempt to get it working correctly, but I'm using a Channel Master 1.2M dish, with no other options to alter the dish, unlike one I saw, using the Gibertinis elevation adjustment, which apparently worked, in getting the motor to track the arc.It might only require a few minor adjustments, to get mine working perfectly, but based on my last attempts it was very fiddly, and everytime I tried gently moving the motors top adjuster the extender brackets slipped forward. I was getting closer when I ran out of sunny weather.At the moment I'm spending all my free time sorting out the rear garden, which is all clay, so difficult to dig, and full of weeds.If I had my way, it would all be paved over, and then I could create a dish farm !!!!!!</blockquote>

[QUOTE="Mickha, post: 810917, member: 187442"] With mine I can currently get all the satellites, that I've tried, from 42E to 30W, but it still isn't tracking the arc 100% correctly. This could be because I had to drill 2 holes, to get the adapter plate to fit, and I might have pushed it too far forward, limiting the top adjusters ability to compensate sufficiently to allow perfect tracking. When I have time, I will take it down, and attempt to get it working correctly, but I'm using a Channel Master 1.2M dish, with no other options to alter the dish, unlike one I saw, using the Gibertinis elevation adjustment, which apparently worked, in getting the motor to track the arc. It might only require a few minor adjustments, to get mine working perfectly, but based on my last attempts it was very fiddly, and everytime I tried gently moving the motors top adjuster the extender brackets slipped forward. I was getting closer when I ran out of sunny weather. At the moment I'm spending all my free time sorting out the rear garden, which is all clay, so difficult to dig, and full of weeds. If I had my way, it would all be paved over, and then I could create a dish farm !!!!!! [/QUOTE]

Verification