Reply to thread

Message: <blockquote data-quote="bubby-joe" data-source="post: 576413" data-attributes="member: 307458">I don't want to use a DSS lnbf, as there not matched to a prime focus dish and will only see a small portion of the dish, approx 1/3rd of a 10/12 foot dish is OK for signal quality but a 6 footer falls short, equal to an 18 inch dish but no more.  limits Ku to 5 satellites all DSS birds and linear satellites to Zero.I'm putting it on a 6 ft andrews solid spun aluminum on an Orbitron SX spin mount and for it to work it requires the PHF-031 and the ADF-120 scale ring plus a c-band scale ring to give adequate performance from the Ku side. the c-band digital and the 6 ft dish is more than adequate for good signal quality this is why I'm looking for this particular scale ring.Driven by a V-box III and a  24 inch Von-Weise actuator controlled by a Pansat 2500a FTA box and DiSeqC 1.0 or USALS commands.</blockquote>