Reply to thread

Message

<blockquote data-quote="Mickha" data-source="post: 449790" data-attributes="member: 187442">Hi Turok,I have found this information on your receiver:A software update (v1.0.21) for the Pace DS810XE High-Definition set-top box is available on the following satellites:<ul>
<li data-xf-list-type="ul">HotBird @ 13.0°E: 12476 H 27500 / PID 1999</li>
<li data-xf-list-type="ul">Astra 1 @ 19.2°E: 12148 H 27500 / PID 2402</li>
<li data-xf-list-type="ul">EuroBird 1 @ 28.5°E / Astra 2 @ 28.2°E: 11428 H 27500 / PID 2402</li>
</ul>To download the new software please enter the 'Setup menu' and select 'Software update'. Next select the appropriate satellite and ensure that the transponder parameters match those given above. Then press &lt;OK&gt; to start the update. The download will take several minutes, during which time the box should not be turned off. After the download is complete we recommend resetting the box using the 'Factory Reset' selection in the 'Setup Menu'. This will erase all the stored user settings. Please note that this step can be omitted, for example if you want to keep your own channel lists.You could skip the update and just try the factory reset in the set up menu.For further help and support check here:_http://www.pacemicro.com/corporate/content/webcontent.asp?nav=products&amp;fullid=products_810xe_support</blockquote>

[QUOTE="Mickha, post: 449790, member: 187442"] Hi Turok, I have found this information on your receiver: A software update (v1.0.21) for the Pace DS810XE High-Definition set-top box is available on the following satellites: [LIST] [*]HotBird @ 13.0°E: 12476 H 27500 / PID 1999 [*]Astra 1 @ 19.2°E: 12148 H 27500 / PID 2402 [*]EuroBird 1 @ 28.5°E / Astra 2 @ 28.2°E: 11428 H 27500 / PID 2402[/LIST]To download the new software please enter the 'Setup menu' and select 'Software update'. Next select the appropriate satellite and ensure that the transponder parameters match those given above. Then press <OK> to start the update. The download will take several minutes, during which time the box should not be turned off. After the download is complete we recommend resetting the box using the 'Factory Reset' selection in the 'Setup Menu'. This will erase all the stored user settings. Please note that this step can be omitted, for example if you want to keep your own channel lists. You could skip the update and just try the factory reset in the set up menu. For further help and support check here: _http://www.pacemicro.com/corporate/content/webcontent.asp?nav=products&fullid=products_810xe_support [/QUOTE]

Verification