Reply to thread

Message: <blockquote data-quote="Burnham Beech" data-source="post: 1113047" data-attributes="member: 175046">I have a similar motor - it was sold as a "Jaeger SMR 128 H-H motor".  There seem to be various designs for the stub pole at the top.  I can only tell you that my motor has performed well in the past five years (now dismantled) with a (heavy) 1 metre dish.  There is some play in the bearings, but never had to adjust after the initial set up.  I would not trust my motor on a heavy 1.2 meter CM dish though.  But my motor is now very old, and was used for a few years before the recent installation.  The photos above show motors in far better condition that mine.</blockquote>