booji
Member
- Joined
- Feb 3, 2009
- Messages
- 7
- Reaction score
- 0
- Points
- 0
- Age
- 56
- My Satellite Setup
-
Moteck SG-2100A Motor
1M lenson Heath Antenna
15M CT100 Co-ax
Azurewave (twinhan) AD-SP 400 Pc card
Smart Titanium quad lnb (not in use)
Cambridge 0.6dB LNB (in use)
- My Location
- UK
After recently intalling a new system (with old dish) I had intermittent motor problems, after much tracing I found the PC card was shutting down the power to the motor when the motor was moving from certain positions along the arc (even with the dish not attached).
I have solved the problem (hopefully) by swapping my new 4 port titanium (230mA current) with my old cambridge LNB (80mA).
I am a bit dissapointed as I wanted eventually run 2 PC sat Cards in an HTPC.
Has anyone managed to run a quad or 2 port LNB off a motorised system and PC card? If anyone has please let me know.
I have solved the problem (hopefully) by swapping my new 4 port titanium (230mA current) with my old cambridge LNB (80mA).
I am a bit dissapointed as I wanted eventually run 2 PC sat Cards in an HTPC.
Has anyone managed to run a quad or 2 port LNB off a motorised system and PC card? If anyone has please let me know.