Dreambox 7020
1. you need to Menu, setup/expert setup/communication setup,
2. Untick DHCP, leave it like that & tick enable network
3. Install the relevant ips, you must give your DB7020 its own ip
My IP 192.***.0.100 (this may differ from your own ip but the last number should be anything over 20)
4. Set the third line to LAN
5. Netmask/subnetmask will be 255.255.255.0 ( this is common to nearly all computers.
6. The Last two lines, 192.***.0.*** will be your computers default gateway which are both the same
192.***.0.***
7.Set port to 21 or 80 the most popular settings
8. Press green to save settings, exit screen & go back in to check that settings have ben saved.
9. You will find the relevant ips if you type into you computers cmd
centre,
start/run/ in the box type cmd
press enter, a black box will appear, type only this command,
ipconfig
this is where you will type in your own ips to replace my own above
The first ip you will type in DB7020 the first three rows, the last being 100 as I explained above.
--------------------------------------------------------------------------
If the above has been done correctly your computer should be able to talk to the DB7020 throught an FTP programme ie:- Globalscape Cute Pro, or some other FTP Prog so that you can upload Cams & new keys etc into the rec. this is one of the ways to install the new keys, other ways are through installing a plugin if your dreambox is connected to the net all the time & saves a lot of time by directly retrieving the new keys & installs them, this is all done by going into the blue button menu, press blue button/plugins/key downloader or something similar.
If you bought your DB7020 new you may well have to change the image to support plugins & addons etc.
I would recomend PB-Enigma V2 as it has a really good blue button menu for updating cam,keys,plugins & other stuff,
most other images usually need the plugin for key downloading,
regards,
The wabbit