Reply to thread

Message

<blockquote data-quote="A nonymous" data-source="post: 539124" data-attributes="member: 240839">It sounds to me that either you haven't setup the positions on the box or your setup isn't following the arc correctly <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite53" alt=":confused" title="Confused&nbsp; &nbsp; :confused" loading="lazy" data-shortname=":confused" />Is the pole that your motor is mounted on 100% vertical.&nbsp; If it isn't your not going to get it to track the arc properly. <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite9" alt=":eek:" title="Eek!&nbsp; &nbsp; :eek:" loading="lazy" data-shortname=":eek:" />Also are you using USALS or DISEqC 1.2 to set the sat positions.If your using USALS you will need to enter the exact co-ordinates of where your dish is and then 99% of the time it gets it wrong and you have to adjust the settings on the receiver manually.I would just try setting the receiver up in DISEqC mode.&nbsp; If its the same as my TM1000 and TM5500 you can set up the whole arc in about 10 mins :-righton:-beerNano</blockquote>

[QUOTE="A nonymous, post: 539124, member: 240839"] It sounds to me that either you haven't setup the positions on the box or your setup isn't following the arc correctly :confused: Is the pole that your motor is mounted on 100% vertical. If it isn't your not going to get it to track the arc properly. :eek: Also are you using USALS or DISEqC 1.2 to set the sat positions. If your using USALS you will need to enter the exact co-ordinates of where your dish is and then 99% of the time it gets it wrong and you have to adjust the settings on the receiver manually. I would just try setting the receiver up in DISEqC mode. If its the same as my TM1000 and TM5500 you can set up the whole arc in about 10 mins :-righton :-beer Nano [/QUOTE]

Verification